AIM System Help

[Dog Licked Racing]

IS there a AIM specialist among us, I think I want to put a AIM system of some type into my ESR Sports Racer (same as a FE).

I have some early questions.

[Chris Livengood]

It probably makes more sense to just ask your questions. Since they are basic it's unlikely you need a "specialist."

[2BWise]

I'm in the same boat and recently spent some time discussing AIM hardware with Matt from Trailbrake.net; matt@trailbrake.net. I know he's on here as well. He was very helpful as I'd never worked with AIM before but with a few other comparative products.

[Jtovo]

Just call AIM in Virginia. They are awesome.

Address: 1636 9th St SE B, Roanoke, VA 24013

Phone: (540) 342-9680

[farrout]

David and Ellen Ferguson have been a lot of help to me on the AIM system. VeracityData.com

[dsmithwc04]

I second Dave and Ellen. David knows the AIM system inside and out and they are always available when I need assistance.

Feel free to PM me if you have any questions on your particular chassis. I have an EVO 4 system on my FE with the AIM formula wheel version 2 logging suspension, steering, brake pressures, etc...

[iamuwere]

I have an Aim system fresh out of an FE as well if you don't have it yet


Sent from my iPhone using Tapatalk

[Dog Licked Racing]

imauwere - PM Sent

Thanks go out to Matt R for all the early guidance - My brain is full for now.

[Dave SanF 50]

I have taken one of Roger Caddell's seminars before. Tons of great info. This one is in Alton, VA fairly close to you.

http://www.aim-sportline.com/eng/rog...inars-2017.htm

May 13th, 2017 – Alton, VA Data Seminar - Practical Data Analysis for Automotive Racers
When: Saturday, May 13th, 2017 – 9am to 4pm
Where: Krause & Associates/Virginia International Raceway, Alton, VA
Contact: Peter Krause, email or phone: (919) 740-1871