Looks pretty good! I attended the winter series meeting at PRI and the price point on both cars is going to be reasonable.
http://www.racer.com/road-to-indy/it...a#!unnamed__3_
Looks pretty good! I attended the winter series meeting at PRI and the price point on both cars is going to be reasonable.
http://www.racer.com/road-to-indy/it...a#!unnamed__3_
Kevin Davis
04 Pro Mazda
95 Lamborghini Diablo
59 Piper Comanche
Missed price point....?
How much for usf2000
and how much for Pro Mazda>?
Maris Kazia ,CEO
EuroKraft Inc Racing
Circuito do Sol
2014 Radical SR 3 RSX, 2x Tatuus FA 01
BMW HP2 .BMW K1200 R.Porsche 996 Carerra 4s
Not too shabby!!
Maris Kazia ,CEO
EuroKraft Inc Racing
Circuito do Sol
2014 Radical SR 3 RSX, 2x Tatuus FA 01
BMW HP2 .BMW K1200 R.Porsche 996 Carerra 4s
What's the weight going to be? Hard to tell but this looks similar to the F4 which has a lot more drag then the current USF2000 car. Keeping same engine package will that slow the cars down overall compared to existing VD models?
Steve Bamford
Very nice looking car !
Since the engine package for usf2000 is being kept the same does that mean their are going to be a substantial amount of sliders for sale next fall? No need to worry about MZR "equalization" into FC? Sorry if this has been covered elsewhere already and I'm just late to the show.
Kevin Davis
04 Pro Mazda
95 Lamborghini Diablo
59 Piper Comanche
$51K? I assume that's WITHOUT the engine? If that's WITH, then we're living in a GREAT time to be a bunch of club racers. As, IMHO, when these cars "filter down" to the club scene, they should be cheap(er), and still be some real kick-ass hardware.
That's without engine. And even in 2016, sorry but you still get what you pay for. A $50k formula car is full of compromises. The point however is that there is a large field with the same car and the same problems.
Thanks ... Jay Novak
313-445-4047
On my 54th year as an SCCA member
with a special thanks to every SCCA worker (NONE OF US WOULD RACE WITHOUT THE WORKERS)
Over all the car looks really good and I like that the chassis will be modular between usf and pro mazda. But I wish they would have figured out a way to some how do away with the air intake on the side of the car.
Because racecar...
Thanks ... Jay Novak
313-445-4047
On my 54th year as an SCCA member
with a special thanks to every SCCA worker (NONE OF US WOULD RACE WITHOUT THE WORKERS)
Thanks ... Jay Novak
313-445-4047
On my 54th year as an SCCA member
with a special thanks to every SCCA worker (NONE OF US WOULD RACE WITHOUT THE WORKERS)
F2000 Championship Series= 22.3 average entry
F1600 Championship Series= 19.57 average entry
Atlantic Championship Series= 11.86 average entry
Seven race weekends
----------
In memory of Joe Stimola and Glenn Phillips
If I was independently wealthy and as a result could commit enough of that wealth to open wheel racing I think I would just go straight to Indy Car. Surely all of the expense you would save by skipping all of these junior series could be used to test and eventually buy your way into a seat. Especially considering that you are going to be paying for that Indy Car ride in most cases anyways.
Chris Livengood, enjoying underpriced ferrous whizzy bits that I hacked out in my tool shed since 1999.
Greg Rice, RICERACEPREP.com
2016 F2000 Champion, Follow RiceRacePrep on Instagram.
2020 & 2022 F1600 Champion, 2020 SCCA FF Champion, 2021 SCCA FC Champion,
Retirement Sale NOW, Everything must go!
The car looks very similar to the Tatuus they run in New Zealand Toyota series.
My rough guess on costs for PM18:
2 sets of wheels $5000
dampers: $8000
engine: $30,000
tub with extras: $62,000
total of $105,000
I think this would be a good value, but it seems a little cheap when compared to the next level up.
I know, I was speaking solely towards the trend that I've seen where if you point out that the price of a new car is affordable, someone steps up to say that "The reason it's so cheap is because it's crap."
I *FULLY* support the F4. Once they start to trickle down to us poor club racers, I think the world will be a more beautiful place.
It will come with a high-end Cosworth data system and wheel, PFC F3-style brake package, American Racing forged aluminum wheels similar to those on the Dallara IL15 Indy Lights cars, paddle-shifter, carbon nose/front wing assembly, and upgraded driver safety protection – an enhanced bulkhead for U.S. circuits.
According to the series, "the cost of the USF-17 chassis – not including engine, wheels and dampers – is $51,400."
Your numbers add up to 105 k according to what you wrote. You forgot to add assembly costs as they are not listed in the Series numbers. Coming without all those parts there is an install required. Even before that you are 45 k plus more then all other F4's so I do not see the "value" as much as you seem to. I am also pretty sure the FIA price cap on parts that F4 has will not be offered on these cars.
I am sure the extras will likely be high end race parts so it will cost more, but is it worth almost double?
Steve Bamford
I just wanted to clear some stuff up about the USF-17 car. Total cost of car is $84,000. That is for one set of wheels, new engine, ECU/GCU, shipping to Haas, shocks, engine harness. This does not include any taxes. Of course they will be some more wheels that need to be purchased and a spare package kit but if racing in USF2000 the need for a spare kit is not needed as much as Haas is at every event.
I anyone would like more information on the car I have some more information I could send you. We are starting a USF2000 program for next year with the introduction of the new USF-17. If you are interested email me and I can give you some more information.
We also have Pro Mazda's available for arrive and drive at Formula Car Challenge and some Pro Mazda's for sale in the shop.
Hope this clears up some things about the USF-17. I have PDF that breaks this all down but file is too big to attach. Send me an email if you would like it.
Kevin
There are currently 1 users browsing this thread. (0 members and 1 guests)