I spent my whole life working in aerospace, and having access to a machine shop. But now I am retired....damn.
So here's what's up. If you look at this photo of the front end of the PC10 you will see a wing adjustment block.
http://forums.autosport.com/topic/114644-penske-pc10/
On my car this is totally missing....both sides....the rod on the wing just sits on that horizontal surface. Obviously that's not quite as bad as it seems cause the last use of the car was just fun lapping....not racing.
Anyway, appears to be two pieces each side.....a housing and a Al block that is threaded. The housing appears to be flat stock bent and welded Al? I suppose this piece could be billet.
Anyone have a mill and wanna help out? That would be very cool. If not, I'll try to find a local machine shop that does small custom jobs.
Thanks!