FF lift

[fouraces]

Does any one know where I can get one of these?

[Richard Hybels]

You might want to look into that before buying one. I've been in and out of FF many years and I have yet to see any FF guy using one of those lifts but I don't know why. Vee guys yes but never one FF guy.
Just sayin

[Firesmith]

I have a lift just like that pictured and use if for my Crossle 35f all the time! It works great and certainly beats bending down all the time, now that I am of a certain age! I wish I knew where they were made because I could have sold a dozen of them the past few years. Mine has a logo on it that say "Kar Jac". Good luck hunting one and let us know if you ever find a current supplier!

[BeerBudgetRacing]

I think this guy used one for an FM

http://www.apexspeed.com/forums/show...highlight=lift

And I'm not sure if they are sold anymore:
http://www.apexspeed.com/forums/showthread.php?t=48365

I think Richard is right. Really only see Vees using them....

[Don Jones]

Do a search for Kart racing lifts. I know Streeter Super Stands have a lift like the one pictured

[racerdad2]

I have one for my karts. It's very old. Been repainted several times. I'll try to track down who made it.

[Bob Posner]

Brian McCarthy in Sacramento makes them. He's a frequent poster on the fv section.

[BeerBudgetRacing]

Brian McCarthy in Sacramento makes them. He's a frequent poster on the fv section.

See:

http://www.apexspeed.com/forums/showthread.php?t=48365

[La Scuderia Raggi]

Only thing I use on my FC Van Diemen.

[Brian C in Az]

Does any one know where I can get one of these?

Marshall and I were talking about those recently. I have the plans and we were discussing making a few in my shop. One for me, him, Josh L, and maybe a couple other guys in our group. Shoot me a pm with your name if interested in getting in.

[La Scuderia Raggi]

Blake Tatum built mine. He's on ApexSpeed too. We took some measurements first to make sure it was wide enough to accommodate the side pods (barely).

I left my driver ballast in once and picked the car up and that was a bit of a struggle so I'd say 1000 lb max load.

When looking for a winch, make sure you get one with a steel cable. There are some out there that have a high lift rating with the non-metal cables. If you do get one of these, replace the poly robe with wire cable, or it can get ugly.