AIM Evo4 + Mychron 3 Dash

[GBugg]

I just changed my Evo3 system out for a "lightly used" Evo4. It powers up and takes the configuration file, but the dash goes through it's boot up and then shows "no connection" . I have it plugged into the exp. port. Any ideas?

Thanks.
George

[romoman]

Did it work before? I wasn't aware the Evo4 would work with a Mychron dash. I thought you needed one of the steering wheels, GDash, or MXL dash.

[Mark Filip]

Before the G dash came out there was a mychron display that was only a display and was used with the evo 4. It that what you have or are you trying to use your old mychron 3 as a display? Veracity racing is very helpful i would give them a call.

[GBugg]

I called the folks at AIM Sports. They were great! Robby walked me through the configuration. And we got everything working except the dash. Turns out the M3 Dash needs to be reprogrammed but they can do that very quickly at AIM. So we should be ready for the July Mid Ohio race with plenty if time to spare.