2007 Speads RM07 F1000 or FB

[nuisance]

Updated to 2011 Aero Package
total time on chassis 12 races, 5 test days, and 4 hours slow speed practice
2008 GSX-R engine refreshed by Rilltech before the 4 hours practice
Rilltech wet sump and headers
Flatshifter Expert and Max, lever shift or paddles, easy conversion back and forth
protech lightweight shocks
4-piston Willwoods
Quaife LSD
DynoJet Power Commander Engine Management
Auto/manual fire system
MyChron Gold dash and data logger
transponder mount in nose
two chains and several sprockets for various final drive ratios
SCCA logbook with 2012 tech inspection
Belts will need to be replaced for 2013
$29,995

Now $28K including spare wheels and tires

Also available, spare set of wheels with sticker Hoosiers $2500

pictures at http://www.lazy8.net/image%20storage.htm

John Huft
cell nine seven oh 759-1600
home nine seven oh 731-1978

john 'at' lazy8.net

[bmsrac]

Hi John,

I have just bought a JKS (British Speads) from the UK and am new to FB cars. We are in the process of introducing F1000 cars to Western Australia.

I was looking with interest at your photo's and have a question to ask in regards to the lifting lugs you have attached to the front wing uprights. Do you have another structure inside the fiberglass nosecone to support the weight of the car without breaking the nosecone.

Additional as my car was bought as an incomplete car have you any photo's of the clutch mechanism at the gearbox connection. I need to work out how to hook up this component.

Any help would be appreciated.

Cheers,

Derek

[nuisance]

Hi John,

I have just bought a JKS (British Speads) from the UK and am new to FB cars. We are in the process of introducing F1000 cars to Western Australia.

I was looking with interest at your photo's and have a question to ask in regards to the lifting lugs you have attached to the front wing uprights. Do you have another structure inside the fiberglass nosecone to support the weight of the car without breaking the nosecone.

Additional as my car was bought as an incomplete car have you any photo's of the clutch mechanism at the gearbox connection. I need to work out how to hook up this component.

Any help would be appreciated.

Cheers,

Derek

Hi Derek

There is a structure inside the nose cone that is part of the crash structure and hooks in to the inside of the nose. It is very sturdy. i will try to remember to take a picture tomorrow when I'm at the shop.

The clutch linkage is inside the clutch housing, on the left side of the engine on top of the final drive sprocket. It is a hydraulic cylinder, and is integral really to the engine. Then you should just have a hydraulic line going up front to the clutch master cylinder. It is hidden under some scat duct in the pics, so I'll try to take a better one of that too.

I hope this helps, let me know if you have more questions.

John

[skl2]

Hi there...besides the extra set of wheels available for purchase and the sprockets, do you have any other spares for the car such as wings, suspension bits, etc?

[nuisance]

Hi there...besides the extra set of wheels available for purchase and the sprockets, do you have any other spares for the car such as wings, suspension bits, etc?

Not much really, a pair of springs, brake pads, some aero bits that are optional on the body, parts to connect the front anti-roll bar that is disconnected now.

Derek, sorry, I got in a rush yesterday and forgot your pictures, but today should be calmer.

John

[nuisance]

Derek, sorry, I got in a rush yesterday and forgot your pictures, but today should be calmer.

John

Derek, there are a couple of new pics on the picture page

http://www.lazy8.net/image%20storage.htm

Let me know if you have more questions.

John

[bmsrac]

Hi John,

Thanks for the additional photos. I apologise for asking for more details however I bought the car without engine mounts and the supplied drawings aren't that great.

Would it be possible for you to provide some photo's of the front and rear engine mounts (particularily the chain tension system).

Cheers,

Derek

[nuisance]

Hi John,

Thanks for the additional photos. I apologise for asking for more details however I bought the car without engine mounts and the supplied drawings aren't that great.

Would it be possible for you to provide some photo's of the front and rear engine mounts (particularily the chain tension system).

Cheers,

Derek

Derek, sorry to be so slow, I just can't seem to get to the shop.

The engine mounts are just flat plates of aluminum. I will get some pics when I can.
The chain tensioning is done at the rear sprocket, which is mounted on the diff. The mount is eccentric, and turns to move the centerline of the diff/sprocket fore and aft, adjusting the chain tension.

John

[thorman]

Hey John:

Is this still for sale? Where in Colorado are you?

Thanks,

Steve.

[nuisance]

Hey John:

Is this still for sale? Where in Colorado are you?

Thanks,

Steve.

Hi Steve

Yes, the car is still for sale. Yesterday I moved it and myself to Tucson for the winter.

John

[skl2]

John,

Where in Tucson are you located? I'm in Scottsdale now for a week and might be interested in checking out the car. If you want to call my cell rather than post it's 515 two zero eight 1119

Kent

[nuisance]

It is time for you racers to get ready for the 2013 season!

To help the cause, I will reduce the price of this low time car by $2500 by including the spare set of wheels and sticker Hoosiers.

John

Updated to 2011 Aero Package
total time on chassis 12 races, 5 test days, and 4 hours slow speed practice
2008 GSX-R engine refreshed by Rilltech before the 4 hours practice
Rilltech wet sump and headers
Flatshifter Expert and Max, lever shift or paddles, easy conversion back and forth
protech lightweight shocks
4-piston Willwoods
Quaife LSD
DynoJet Power Commander Engine Management
Auto/manual fire system
MyChron Gold dash and data logger
transponder mount in nose
two chains and several sprockets for various final drive ratios
SCCA logbook with 2012 tech inspection
Belts will need to be replaced for 2013
$29,995

Also available, spare set of wheels with sticker Hoosiers $2500

pictures at http://www.lazy8.net/image%20storage.htm

John Huft
cell nine seven oh 759-1600

john 'at' lazy8.net

[nuisance]

Bump for price reduction.

Let's get this car back on the track!

[nuisance]

I made a couple of little videos...

http://youtu.be/9BkETUbgyhs

http://youtu.be/1Ck10XU3pP8

This is a good car. Offers?

John

[Jasonrmbell]

Year Chassis?

[nuisance]

Year Chassis?

The car was all new in 2007.

[skl48]

Is the car still in AZ or back in Colorado?

[nuisance]

Kent, I have taken a deposit on the car. I will let you know if it falls through.
Thanks, John

[skl2]

Hey John, did you finalize the sale?

[nuisance]

Not yet

[nuisance]

Sale is final now.

Thanks ApexSpeed!

[Gearslingr]

Grats John, hopefully we'll see another car out on the track soon.

D