Steel FF wheels

LenFC11 · August 6th, 2012, 12:55 PM

6 wheels total. These wheels have been sitting in a garage for 15 yrs and not used.

4 wheels have very old tires mounted. prefer not to dissmount but will at buyer's expense

2 wheels are bare unmounted, but have small bends in outer lip, should b able to see in pics. apears to be an easy fix, but i am not a wheel expert

3 3/4" bolt cirlce
bolt holes are 9/16 on a tape measure
will check back spacing

asking $400 for all 6 or reasonable offer plus shipping or prefer local pick on these

*ric baribeault* · August 6th, 2012, 2:35 PM

they appear to be the original rims on the 78 VD

t walgamuth · August 6th, 2012, 7:22 PM

Willing to sell one straight one?

LenFC11 · August 7th, 2012, 12:31 AM

not at this time. would like to keep the 4 good ones together. if you want one of the bent one make an offer

wokka · August 10th, 2012, 9:19 PM

Hi, May be interested in 4, or 6 depending on freight, are you able to check a freight cost to Melbourne Aust please. Also would it be possible to cut the rubber off rather than the cost demounting.
thnx
wokka

LenFC11 · August 11th, 2012, 11:50 AM

if you pay for wheels and accpet any damage that may or may not occur during cutting tires off i would do my best but will not take responsablitly

also, you would have to check on shipping fron NJ.

thanks for your interest

LenFC11 · September 5th, 2012, 7:33 PM

still avil

LenFC11 · September 8th, 2012, 12:30 PM

regarding the odd bolt size.. i was not able to get a caliper in there to measure, i did it with a tape meassure and kind of eyed it.. my guess is it a standard size hole and would use a standard size lug. the car they came off of was a 79 vd last run 15 yrs ago. i don't see any signs the car was modified, but i don't know these older cars too well