wings and things

[rynoracer]

Hi all,

I am almost done with my home made f1000 car ( pretty much a reverse engineered scca spec car ) and i am looking for some heplfull advice. The car is powered by a 2003 stock r1 engine which i am going to run with the original oil pan. Does any body know of a source for a set of baffles or kit which i can purchase off the shelf? Also i am looking for a low cost wing supplier ( if this really exsist!) the guys at Pennon are great but out of my price range. Any help would be appreciated. Will post photos soon , and a have a few more tech questions that i will bore this forum with later.

Thanks

ryno

[Stan Clayton]

Call Arne Loyning for R1 baffles. 503.775.2999

[carnut169]

Wings are expensive. You can call Keith Averill... or try and find used.

[jonbaytos]

Hi Ryno,you should give me a call.I have three Van Diemen chassis that are similar to what you have.I have a selection of aero parts that may be of interest.JON 941 729 5706

[rynoracer]

Wings are expensive. You can call Keith Averill... or try and find used.

Thanks for all of the help, i am new to this forum and dont know all the players, perhaps somebody could get me Keith's contact info.

Thanks
ryno

[Joefisherff]

Here you go:

http://racing-stuff.com/

[racer27]

http://racing-stuff.com/


632 Ajax Drive,Madison Heights,Michigan,48071 USA


E-Mail information@racing-stuff.com

(Phone #) 248-585-9139

[Richard Dziak]

Ryno:

I am buying a new Phoenix F1K-07 F1000 and have sold my 93 VD FC....I have two sets of front wings, that I would like to sell. The are all aluminum, and in great shape. They may be ideal for a VD/Swift conversion to F1000 or any other conversion. I would sell you one or two of the front wing sets (right and left side) for $300 per set, + the shipping costs. If you have an interest, I can shoot you a picuture this weekend and email it to you. These wings may be a great starting point or may work well as spares for the future.