Fellas;
I need both left and right 90 degree aluminum water pipes that plug into the upper radiator inlets.
Iverson
Fellas;
I need both left and right 90 degree aluminum water pipes that plug into the upper radiator inlets.
Iverson
V/r
Iverson
Rick-
Most conversions will retain these pipes... Comprent might have them?
Sean O'Connell
1996 RF96 FC
1996 RF96 FB
2004 Mygale SJ04 Zetec
That's what I was thinking.
You could, alternatively, buy hoses with 90 degree bends and connect them with straight pipe.
Racer Russ
Palm Coast, FL
Another alternative:
Purchase the appropriate size aluminum tubing for your application, bend it up to whatever specs you need, then use a tubing beader (mid way down the page) to put a bead around the end for hose retention.
Cheers,
Rennie
OK, I give. What's the difference between a Left and a Right 90 degree bend?
Curious in Roswell
Woud you prefer he call one of them a 270 degree bend? :-)
Racer Russ
Palm Coast, FL
They may not be flat and 90 degrees. They may also bend upward toward the water pump or inlet? Just guessing.
Dave
Springstein, Madonna
way before Nirvana
there was U2 and Blondie
and music still on MTV...
Bowling for Soup, 1985
I've managed without a tubing beader by laying a weld bead around the tube. Not as pretty, but it will work in a pinch.
Since mine are loose at the moment, I took a pic.
Last edited by RussMcB; 09.30.09 at 9:40 PM.
Racer Russ
Palm Coast, FL
They be the ones.
I have elected to play with mine. Any tube beaders available for rent?
V/r
Iverson
There are currently 1 users browsing this thread. (0 members and 1 guests)