I need the Nadella bearings that go inside the rockers on the Ralt RT-41. Anyone have a clue as to where I might find them?
Pegasus has some of these, but not the right size.
I need the Nadella bearings that go inside the rockers on the Ralt RT-41. Anyone have a clue as to where I might find them?
Pegasus has some of these, but not the right size.
Paul,
Have you checked Mc Mastercarr for them ?
Yes. I didn't see them unless they're under some strange category.
What size are you looking for?
Keith
The combined bearing has stamped on it - Nadella RAX 730. It has an ID of 30 mm, and an outside (the needle bearing cup) of about 38 mm. It's hard to measure while in the rocker.
The second thrust bearing is AX3047, ID=30 mm, OD=47mm, 2mm thick.
The thrust washer has ID=30mm, OD=47mm, 0.8mm thick, number CP3047.
Originally Posted by Paul LeCain
Contact Kelly at Shuster Corp. for Nadella Bearings. kdawicki@shustercorp.com
we stock a large quantity of all types of nadella bearings. thanks, kelly
Anyone have updated contact info at Shuster - have tried this contact but with no response
Contact Kelly at Shuster Corp. for Nadella Bearings. kdawicki@shustercorp.com
we stock a large quantity of all types of nadella bearings. thanks, kelly
Have you tried Mesa Bearing in Huntington Beach? The supply quite a bit of the motorsports industry with bearings.
http://www.mesabearing.com/
They don't seem to be a Nadella rep, but likely other lines have combination bearings available.
Tim
------------------
'Stay Hungry'
JK 1964-1996 #25
This is the last contact info I have:
Shuster Corporation
4 Wright Street
New Bedford, MA 02741-3086
Phone 508-999-3261 ext 522
Paul,
I have them .
Shoot me a email.
Mike D.
There are currently 1 users browsing this thread. (0 members and 1 guests)