WTB: Van Diemen FC bolt kit suspension

[redcar9]

I'm looking for the AN style bolt kit to fleshing up the suspension.
Washers, nuts bolts.

Does anyone have this as a complete kit?

[Lotus7]

With all the small variations year to year, not sure such a ‘kit’ exists.
If you’re going to be your own mechanic, a great way to learn about the car would be to measure up everything you need. We’re only talking about 30 or so bolts. :-)
multiple sources of AN hardware are available online.

[Thomas Wirtz]

Save yourself a lot of time and aggravation with these handy gauge's

https://www.pegasusautoracing.com/pr...sp?RecID=10835

https://www.pegasusautoracing.com/pr...sp?RecID=29562

[rockbeau25]

What Thomas said. I just went through the same thing converting my VD to wide track. Measure every bolt and order accordingly from Pegasus.

[Rick Kirchner]

That gauge is $10.50 from Aircraft Spruce.

I've found this hy-loc rivit gauge to be a complement to the drop-in gauge, because it measures grip length. That tells you what bolt size to order even if a bolt that was too long or too short was used previously. https://www.ebay.com/itm/324708951482 A bolt with that grip will then be properly sized for two AN 960 washers and a jetnut.

When you order from Spruce pay attention wo which warehouse its shipping from - they have one in Atlanta and another in LA.

[redcar9]

Thanks everyone this really helps!

it's a 2000 model car if someone has already done the digging.

I will track / post it here to save someone else the efforts.

[Rick Kirchner]

Primus probably has a bolt map for this car

[BeerBudgetRacing]

https://www.primusracingparts.com/An...ent_p_334.html