VD steering rack seals

[autox_vette]

I have an autocross car based off of a VD RF84. The steering rack is leaking, but seems to be tight. Does anyone know where I can get seals to do a quick rebuild/cleanup and re-seal?

Thanks,
Kenton Cabiness

[Charlie Schmidt]

post a couple of pictures
if it's like this one , I can walk you thru it

[autox_vette]

post a couple of pictures
if it's like this one , I can walk you thru it

Thanks Charlie. It's similar but a little different. Pics:

[Steve Demeter]

get the id and od of the seals. Go to the local motion industries, Bearing Distributors Inc or whatever bearing house is local. They should be able to fix you up

[Rick Iverson]

get the id and od of the seals. Go to the local motion industries, Bearing Distributors Inc or whatever bearing house is local. They should be able to fix you up

Yep

[Charlie Schmidt]

the tricky part is disassembly
it's not obvious

[SteveG]

That's a Jack Knight steering rack, my suggestion is send it for a rebuild, there are good vendors out there.
Keith Averill (closest to you)
Sean Kelly
Neil Porter
They all know their stuff and all 3 are on Apex.

Steve