FC: Classifieds: Cars For Sale2010 Carbir DS3 Formula Continental - SOLD
2010 Carbir DS3 - SOLD
2010 Carbir DS3 Formula Continental - SOLD
Last edited by bruiserjr816; 04.13.23 at 4:19 PM. Reason: sold
Fit
Will the car fit a larger driver? I’m 5’10 and 225lbs.
Originally Posted by bruiserjr816
2010 Carbir DS3 Formula Continental
I am offering for sale my 2010 Carbir DS3 FC with Pinto 2L engine. Engine totally rebuilt by Quicksilver Engines and has approximately 2 hours on rebuild. Staffs gearbox rebuilt by Taylor Race Engineering. All wiring by Ray Grienke Enterprises. Ohlin T44 dampers rebuilt by Anze in 2022.The car has been completely inspected, all systems upgraded/repaired. Setup by Bill Wise in spring of 2022. Fuel cell (Fuel Safe) replaced 2021. Belts replaced 2022. Fire bottle needs replacing.
The car comes complete with the following;
Pinto Long-rod engine built by Quicksilver Engines. Engine dynoed at 152 HP.
The bodywork shown is all original white gelcoat and the decals will be removed prior to sale. The chassis and body have only approximately 22 hours of total race time on them.
MXL Pista Data system with GPS and inputs for steering position, brake pressures front and rear, as well as a wide range of engine functions.
Quick jack lift and low stands.
Lightened axles
JetHot exhaust coating
Set of transport wheels with tires. Includes custom dragster tiedowns.
Electrical extras (coils/plugs/wires/etc)
In-car radio system with two headsets and 4 radios
(2) Odyssey batteries with Odyssey charger and additional deep cycle battery for lift and auxiliary start.
Gearsets for Staffs gearbox.
Four sets of wheels;
Two sets of OZ magnesium wheels with mounted R60 (one set stickers) Hoosier slicks
One set of Jongbloed modular wheels with new mounted rain tires
One set of unmounted BBS aluminum wheels
Miscellaneous additional Jongbloed halves and center sections
Multiple upper and lower A arms, radius rods and suspension spares. Spare upright and hubs.
Spare front wing, nose cone, rear wing elements, sway bars, bulkhead, quick jack elements, springs and many small chassis bearings, pins and body fasteners.
The car is located in Lansing, Michigan.
Asking 20.5k for the car/spares package. Will included my 22’ 2022 Cargo Mate enclosed trailer for an additional 12.5k.
PM with questions or if you'd like more info/photos.
Fit
Will the car fit a larger driver? I’m 5’10 and 225lbs.
if it does I’m definitely interested and would like more pics.
Kelly
2010 Carbir DS3 Formula Continental
I am offering for sale my 2010 Carbir DS3 FC with Pinto 2L engine. Engine totally rebuilt by Quicksilver Engines and has approximately 2 hours on rebuild. Staffs gearbox rebuilt by Taylor Race Engineering. All wiring by Ray Grienke Enterprises. Ohlin T44 dampers rebuilt by Anze in 2022.The car has been completely inspected, all systems upgraded/repaired. Setup by Bill Wise in spring of 2022. Fuel cell (Fuel Safe) replaced 2021. Belts replaced 2022. Fire bottle needs replacing.
The car comes complete with the following;
Pinto Long-rod engine built by Quicksilver Engines. Engine dynoed at 152 HP.
The bodywork shown is all original white gelcoat and the decals will be removed prior to sale. The chassis and body have only approximately 22 hours of total race time on them.
MXL Pista Data system with GPS and inputs for steering position, brake pressures front and rear, as well as a wide range of engine functions.
Quick jack lift and low stands.
Lightened axles
JetHot exhaust coating
Set of transport wheels with tires. Includes custom dragster tiedowns.
Electrical extras (coils/plugs/wires/etc)
In-car radio system with two headsets and 4 radios
(2) Odyssey batteries with Odyssey charger and additional deep cycle battery for lift and auxiliary start.
Gearsets for Staffs gearbox.
Four sets of wheels;
Two sets of OZ magnesium wheels with mounted R60 (one set stickers) Hoosier slicks
One set of Jongbloed modular wheels with new mounted rain tires
One set of unmounted BBS aluminum wheels
Miscellaneous additional Jongbloed halves and center sections
Multiple upper and lower A arms, radius rods and suspension spares. Spare upright and hubs.
Spare front wing, nose cone, rear wing elements, sway bars, bulkhead, quick jack elements, springs and many small chassis bearings, pins and body fasteners.
The car is located in Lansing, Michigan.
Asking 20.5k for the car/spares package. Will included my 22’ 2022 Cargo Mate enclosed trailer for an additional 12.5k.
PM with questions or if you'd like more info/photos.
It does, I am 6'3'' 230#. Its snug but comfortable.
Carbir Fit
I am 6"3 and 235 and I made it work.. The shifting is tight... so use a very small knob on shifter.... Great cars... for sure the best straight line speed in the F2000 field...
BB
Messages
I sent you a PM
Kelly no bike motors this time!
We still have those????
We will be keeping the F1000s ( Carbir and Reynard )
But it’s time to look for an FC.
Is your car still available, very interested , Dave
Car is still available
PM Sent
?
Texted BJ today, he said car is sold...
Once again, a day late...
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Reply With Quote