Need seat for Merlyn MK20A

[Velodrome Racer]

Hey gang,
As I am making some changes this off season-I was looking at my seat and placement in my Merlyn. I am wanting to do the foam seat, but before I do that-I wondered what seat options anyone has used to support the foam insert? My current seat was for a much taller driver-it bolts to a crossmember at the front/floor area and the other crossmember at the upper back-not much room to make any adjustments to driver position. Ideas?

[teamwisconsin]

If you care about comfort, safety and performance then you are in luck as the answer is simple one!

http://www.speedseatfactory.com/Full...ontact_Us.html

Jody is the best. In my opinion, there is no point in doing a seat any other way, especially since you are in the midwest. You will not regret it.

[Velodrome Racer]

If you care about comfort, safety and performance then you are in luck as the answer is simple one!

http://www.speedseatfactory.com/Full...ontact_Us.html

Jody is the best. In my opinion, there is no point in doing a seat any other way, especially since you are in the midwest. You will not regret it.

I will check the link out-Thanks!

[hdsporty1988]

I will check the link out-Thanks!

Jody came and poured me a seat in November. I also highly recommend you get a seat from them. You can pour one yourself with some help, but it won't be done nearly as well!