Results 1 to 16 of 16
  1. #1
    Member
    Join Date
    10.17.06
    Location
    New Jersey
    Posts
    60
    Liked: 30

    Default Citation Roller or Complete

    Citation Roller or Complete

    One of the best Citations in the country.All of the best components and upgrades.NEFV Championship winning car with many past and current wins and podiums.

    Updated Brewer Bodywork
    One of the few Updated extended trailing arm rear suspension cars

    Complete Custom VSR/Citation front suspension/spindles, beam, steering etc.
    VSR Short Box
    VSR Stainless Exhaust System
    Belts current through 2025
    Current SCCA annual
    Penske rear shock with remote canister
    Front Penskes with Ron Chuck adapters
    Carbotech Brakes
    Cockpit adjustable Brake Bias
    New battery
    All newer master cylinders, brake lines and hydraulics
    New steering box
    Car is being sold as a roller or complete, photos with engine out are to show all engine accessories that will come with it. (oil cooler, lines, ducting, scoops etc.)Roller $7000

    Complete with Autowerks engine (race ready) add $3500 (note: will not sell the engine separately, only with the car purchase)

    Car is located in NJ

    Attached Images Attached Images

  2. The following 2 users liked this post:


  3. #2
    Senior Member Amon's Avatar
    Join Date
    10.07.02
    Location
    Medina, Ohio
    Posts
    1,520
    Liked: 174

    Default

    This car was my son's car prior to going to Chris Barry, and Brian raced it at the 2016' (his 1st) Runoff's at Mid-Ohio and was running near the top 10 prior to spinning on oil dumped in the Carousel. It's a very updated Citation and was enjoyable to drive!

    GLWS!

    Mark Farnham

  4. #3
    Member
    Join Date
    01.20.12
    Location
    Florida
    Posts
    38
    Liked: 15

    Default

    What's the max driver size?

  5. #4
    Senior Member Amon's Avatar
    Join Date
    10.07.02
    Location
    Medina, Ohio
    Posts
    1,520
    Liked: 174

    Default

    Quote Originally Posted by caracal25 View Post
    What's the max driver size?
    Caracal25,

    I'm 6'1" and around 200lbs., and my son is an inch taller and the same weight and we fit without
    any discomfort driving the car.

    Mark

  6. #5
    Member
    Join Date
    10.02.15
    Location
    Spartanburg, SC
    Posts
    44
    Liked: 20

    Default

    Quote Originally Posted by caracal25 View Post
    What's the max driver size?
    I'm 6'1" only 165 lbs, and fit just fine in my Citation. Depending on build, I'd say 6'2" or 6'3" would be the comfortable limit as far as height goes.

  7. #6
    Junior Member
    Join Date
    06.01.21
    Location
    Connecticut
    Posts
    1
    Liked: 0

    Default

    Hi,

    I just tried to send you a message and it said your inbox was full and cannot receive more. Can you shoot me a message regarding the car?

    dave

    Quote Originally Posted by AMDAS View Post
    Citation Roller or Complete

    One of the best Citations in the country.All of the best components and upgrades.NEFV Championship winning car with many past and current wins and podiums.

  8. #7
    Member
    Join Date
    10.17.06
    Location
    New Jersey
    Posts
    60
    Liked: 30

    Default

    Inbox is now fixed, also sent you a PM



    Quote Originally Posted by david594 View Post
    Hi,

    I just tried to send you a message and it said your inbox was full and cannot receive more. Can you shoot me a message regarding the car?

    dave

  9. #8
    Member
    Join Date
    10.17.06
    Location
    New Jersey
    Posts
    60
    Liked: 30

    Default

    A few questions were asked about spares:

    I does come with a set of mounted rains, as well as 2 brand new long trailing arms and misc. bits.


    Citation Roller or Complete


    One of the best Citations in the country.All of the best components and upgrades.NEFV Championship winning car with many past and current wins and podiums.

    Updated Brewer Bodywork
    One of the few Updated extended trailing arm rear suspension cars

    Complete Custom VSR/Citation front suspension/spindles, beam, steering etc.
    VSR Short Box
    VSR Stainless Exhaust System
    Belts current through 2025
    Current SCCA annual
    Penske rear shock with remote canister
    Front Penskes with Ron Chuck adapters
    Carbotech Brakes
    Cockpit adjustable Brake Bias
    New battery
    All newer master cylinders, brake lines and hydraulics
    New steering box
    Car is being sold as a roller or complete, photos with engine out are to show all engine accessories that will come with it. (oil cooler, lines, ducting, scoops etc.)Roller $7000

    Complete with Autowerks engine (race ready) add $3500 (note: will not sell the engine separately, only with the car purchase)

    Car is located in NJ

    [/QUOTE]

  10. #9
    Member
    Join Date
    03.24.21
    Location
    Chattanooga, Tennessee
    Posts
    59
    Liked: 18

    Default

    Absolutley insane that this car is still available..

  11. #10
    Member jeffa711's Avatar
    Join Date
    07.13.14
    Location
    putnam ct.
    Posts
    76
    Liked: 41

    Default

    Unbelievable that this car has not sold
    Its a Rock solid car. Always in the hunt for podiums finishs
    top 3 in Nefv Points 3 of the last 4 seasons.

  12. #11
    Member
    Join Date
    10.17.06
    Location
    New Jersey
    Posts
    60
    Liked: 30

    Default

    Car is sold

  13. The following members LIKED this post:


  14. #12
    Member
    Join Date
    03.24.21
    Location
    Chattanooga, Tennessee
    Posts
    59
    Liked: 18

    Default

    Quote Originally Posted by AMDAS View Post
    Car is sold
    great! Any ideas where it is headed and what series(‘s) it will be raced in?

  15. #13
    Member
    Join Date
    10.17.06
    Location
    New Jersey
    Posts
    60
    Liked: 30

    Default

    Quote Originally Posted by housejoe View Post
    great! Any ideas where it is headed and what series(‘s) it will be raced in?
    Staying in the Northeast with NEFV.

  16. The following members LIKED this post:


  17. #14
    Member
    Join Date
    03.24.21
    Location
    Chattanooga, Tennessee
    Posts
    59
    Liked: 18

    Default

    Quote Originally Posted by AMDAS View Post
    Staying in the Northeast with NEFV.
    Great!

  18. #15
    Member
    Join Date
    10.17.06
    Location
    New Jersey
    Posts
    60
    Liked: 30

    Default

    This car is available again, it is now 100% complete with engine, just raced and new SCCA annual. It is also now located in Boston. PM with questions.

    Quote Originally Posted by AMDAS View Post
    A few questions were asked about spares:

    I does come with a set of mounted rains, as well as 2 brand new long trailing arms and misc. bits.


    Citation Roller or Complete


    One of the best Citations in the country.All of the best components and upgrades.NEFV Championship winning car with many past and current wins and podiums.

    Updated Brewer Bodywork
    One of the few Updated extended trailing arm rear suspension cars

    Complete Custom VSR/Citation front suspension/spindles, beam, steering etc.
    VSR Short Box
    VSR Stainless Exhaust System
    Belts current through 2025
    Current SCCA annual
    Penske rear shock with remote canister
    Front Penskes with Ron Chuck adapters
    Carbotech Brakes
    Cockpit adjustable Brake Bias
    New battery
    All newer master cylinders, brake lines and hydraulics
    New steering box
    Car is being sold as a roller or complete, photos with engine out are to show all engine accessories that will come with it. (oil cooler, lines, ducting, scoops etc.)Roller $7000

    Complete with Autowerks engine (race ready) add $3500 (note: will not sell the engine separately, only with the car purchase)

    Car is located in NJ

    [/QUOTE]

  19. #16
    Member
    Join Date
    10.17.06
    Location
    New Jersey
    Posts
    60
    Liked: 30

    Default

    Car is sold!

    Thanks APEX Speed



    Quote Originally Posted by AMDAS View Post
    This car is available again, it is now 100% complete with engine, just raced and new SCCA annual. It is also now located in Boston. PM with questions.
    [/QUOTE]

  20. The following members LIKED this post:


Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  




About Us
Since 2000, ApexSpeed.com has been the go-to place for amateur road racing enthusiasts, bringing together a friendly community of racers, fans, and industry professionals. We're all about creating a space where people can connect, share knowledge, and exchange parts and vehicles, with a focus on specific race cars, classes, series, and events. Our community includes all major purpose-built road racing classes, like the Sports Car Club of America (SCCA) and various pro series across North America and beyond. At ApexSpeed, we're passionate about amateur motorsports and are dedicated to helping our community have fun and grow while creating lasting memories on and off the track.
Social