Gents;
Hoping someone has found these L shaped aluminum extrusions on the web somewhere. I cannot find anything at McMaster-Carr.
- Long leg is 3.5"
- Short leg is 2.5"
- Width is 2.0"
- Thickness is 0.25"
- No holes
Gents;
Hoping someone has found these L shaped aluminum extrusions on the web somewhere. I cannot find anything at McMaster-Carr.
- Long leg is 3.5"
- Short leg is 2.5"
- Width is 2.0"
- Thickness is 0.25"
- No holes
V/r
Iverson
Here's an option if you specifically need those leg lengths
https://store.buymetal.com/aluminum/...-2.5-0.25.html
Otherwise, mcmaster and onlinemetals have close but not identical.
McMaster-Carr has 90* aluminum in .25 inch with 3 inch legs. Buy a foot and cut as many as you need with a band saw.
Last edited by BorkRacing; 09.30.21 at 1:18 PM.
With these questions that you ask,
& the run about you put me through.
Did you work in military intelligence?
There are currently 1 users browsing this thread. (0 members and 1 guests)