Gents;
I will be having some structural engineering done on a set of ST44 Ohlins piggyback dampers to replace the factory Penske 8100s, external canister.
- my Penske dampers (F & R) are 10.0”, eye bearing centerline to eye bearing centerline;
- the 10.0” is measured out of the car, static;
- canister gas at normal operating pressure.
I need the eye centerline to eye centerline on both front and rear dampers before installed, static, canister at normal pressure, then in the car in race trim, driver in the car (I weigh 160), fuel onboard (on a platen would be great). I visited with Brad today, and although he did not have any data, but he thought the settling would be very little.
Lastly, does anyone have linear displacement potentiometer travel values on any given track for the 8100s?
Your assistance will be greatly appreciated.