Results 1 to 9 of 9
  1. #1
    Member
    Join Date
    12.06.18
    Location
    Moyock, North Carolina
    Posts
    16
    Liked: 1

    Default F5 ballast questions

    Hey guys,
    how are you attaching ballast to your car trying to figure out a way to attach that is easily removable since we have two different drivers driving the car

  2. #2
    Senior Member lance3556's Avatar
    Join Date
    06.08.07
    Location
    Aloha, Oregon
    Posts
    112
    Liked: 28

    Default

    I have thick seat bottom that I plan to cut a couple pockets in to slip in some lead dive weights. I have in the past slipped some ankle weights jammed between the front of my lower seat cushion and the fire bottle.

  3. #3
    Contributing Member Jnovak's Avatar
    Join Date
    12.08.07
    Location
    Dearborn, Michigan
    Posts
    3,787
    Liked: 896

    Default Ballast

    Where you put your ballast and what do you want your weight distribution to be? Are very interrelated This is an important tuning tool!
    Thanks ... Jay Novak
    313-445-4047
    On my 54th year as an SCCA member
    with a special thanks to every SCCA worker (NONE OF US WOULD RACE WITHOUT THE WORKERS)

  4. The following members LIKED this post:


  5. #4
    Member
    Join Date
    07.20.13
    Location
    N.E. OH
    Posts
    31
    Liked: 7

    Default

    I remember a post someone had, I think on f550.us, where they had put a brace across the bottom of cockpit with a post sticking up in the middle. They would put the weight down on the post and it had a cotter pin type of connector to hold it in place. They had pictures of the install and it was pretty slick. I just looked on f500.us and couldn’t find the post. Perhaps this will jog someone’s memory and they can find it for you.

  6. #5
    Senior Member
    Join Date
    10.24.12
    Location
    Charlotte, NC
    Posts
    596
    Liked: 227

    Default

    It's somewhat depend on the ballast material, shape and weight. I used a block of lead. Drilled a hole through it and bolted it to the belly pan.
    Last edited by cory mcleod; 02.25.21 at 11:04 AM.

  7. #6
    Senior Member
    Join Date
    06.14.02
    Location
    Ft. Myers, Florida
    Posts
    549
    Liked: 225

    Default weight

    On one of my cars I used lead weights that were 1"x1"x6" or so and built a locker for them on the floor. I think I had 5 or 6 or them and that they weighed about 2lbs each. I "tuned" the weight by replacing a lead weight with a 1x1 square aluminum dummy to take up the space. This allowed me to subtract only as much as I needed for varying weights (or scales, let's be honest). Lead weights were made by melting and pouring into a proper sized mold.

    Locker was 1x1 aluminum angle bolted to the floor with a lid that screwed to nutserts.

    Sure wish I needed to ADD weight these days!

    John

  8. #7
    Contributing Member GBugg's Avatar
    Join Date
    08.12.05
    Location
    Huntsville, AL
    Posts
    259
    Liked: 57

    Default

    I have always carried my ballast weight inside my driving suit. [emoji15]
    George Bugg
    -----------------------------
    NovaKar
    F600

  9. The following 3 users liked this post:


  10. #8
    Senior Member
    Join Date
    10.24.12
    Location
    Charlotte, NC
    Posts
    596
    Liked: 227

    Default

    Quote Originally Posted by GBugg View Post
    I have always carried my ballast weight inside my driving suit. [emoji15]
    Amen! Been a long time since I had to add weight to a car.

  11. #9
    Senior Member
    Join Date
    06.11.16
    Location
    Las Vegas
    Posts
    148
    Liked: 82

    Default

    I'm 145lbs...……………….I put a farm tractor battery in the car. I don't need a jumper to start the car every time.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  




About Us
Since 2000, ApexSpeed.com has been the go-to place for amateur road racing enthusiasts, bringing together a friendly community of racers, fans, and industry professionals. We're all about creating a space where people can connect, share knowledge, and exchange parts and vehicles, with a focus on specific race cars, classes, series, and events. Our community includes all major purpose-built road racing classes, like the Sports Car Club of America (SCCA) and various pro series across North America and beyond. At ApexSpeed, we're passionate about amateur motorsports and are dedicated to helping our community have fun and grow while creating lasting memories on and off the track.
Social