Gents;
Really crummy on research. Looking for a vendor for course 12 point mil-spec quality bolts with safety wire heads, say 0.25” - 0.75” lengths. Any help?
Gents;
Really crummy on research. Looking for a vendor for course 12 point mil-spec quality bolts with safety wire heads, say 0.25” - 0.75” lengths. Any help?
V/r
Iverson
Not sure how important the 12-point head is, but Aircraft Spruce sells socket heads that are pre-drilled in both fine and coarse thread. I use these in 3/16" for rivnut mounting points.
https://www.aircraftspruce.com/catal...lickkey=971954
-Mark
Mark Uhlmann
Vancouver, Canada
'12 Stohr WF1
V/r
Iverson
let me guess - caliper to upright bolts?
I look for MS20074. Skybolt lists them:
http://skybolt.com/wp-content/upload...-12-7-2017.pdf
I just checked and Aircraft Spruce also lists them as MS20074. They call them "Engine bolts"
Garey Guzman
FF #4 (Former Cal Club member, current Atlanta Region member)
https://redroadracing.com/ (includes Zink and Citation Registry)
https://www.thekentlives.com/ (includes information on the FF Kent engine, chassis and history)
There are currently 1 users browsing this thread. (0 members and 1 guests)