Lower bell housing to frame on a 93 Van Diemen accounting for the pieces sandwiched in there (skip plate and cover).
I see 80 mm at McMaster, etc. bit nothing 85-90 mm which appears to be what I need.
Ideas?
M10 x 1.0 x 85-90mm Socket Headed bolts
Lower bell housing to frame on a 93 Van Diemen accounting for the pieces sandwiched in there (skip plate and cover).
I see 80 mm at McMaster, etc. bit nothing 85-90 mm which appears to be what I need.
Ideas?
I got all of mine from a stainless place - I believe it was allen's fasteners. You in a hurry? I probably have records somewhere
Need in a couple weeks. So I have time.
Check with Metric & Multistandard
It says RFQ, but may be available via Germany.
https://www.metricmcc.com/fine-pitch...ew-p-5722.html
“Racing makes heroin addiction look like a vague wish for something salty.” -Peter Egan
I just googled a bit and found one.
https://www.zieglerbolt.com/m10-1-x-...-fine-thread-3
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Reply With Quote