More Atlantic Wheels - Almost New

[true racer]

I should know what the make of these wheels is, but it seems to have slipped from the gray matter. Can someone let me know the maker of these? This is a set of three fronts and three rears plus two new centers, one rim and two new O-rings and housings for them. Some idiot began to bead blast one of the extra centers. These are also taking up room in my shop and I would like to see them be used. They are almost new. All show signs that tires have been mounted, but one complete set does not look as if it has even been bolted onto a car. The other two, one front and one rear do show marks that they have been bolted up, but probably only once. These are 13 x 14 rear and 13 x 10 front. Here are the specs:

Front backspace is 5 3/4"
Rear backspace is 6 1/2"
Drive pin circle is 3 1/2"
Drive pin hole diameter is 9/16"
Center hole is 2 1/8"

$2000 for the lot

Robert Metcalf

[J Leonard]

Anything legible on the yellow tag on the loose rim half?

[teamwisconsin]

They look like Gotti’s or Speedline’s to me.

[mikey]

I need to measure and see if these will fit my Lola T91/50

[true racer]

The tag is actually on the bagged wheel center. All it says is, "Crack tested OK."

[S Lathrop]

My bet is that they are Jongbloed Wheels

[Thomas Wirtz]

Bill Jongbloed has a contact number posted on another site, I'll send you a pm instead of posting here.

[BeerBudgetRacing]

Bill Jongbloed has a contact number posted on another site, I'll send you a pm instead of posting here.

I think he's retired. Ryan help me identify some old wheels....

https://www.jongbloedracingwheels.com/

But I'm thinking NOT Jongbloed because of the extra ring and seals. I don't think they build like that.
At least none of mine had that.

[true racer]

Thanks for all the help in identifying them.

I have another set of Jongbloed wheels for my FF which look different. However, I don't remember what the Jongbloed wheels looked like after Bill sold the company. Might they be of the second Jongbloed Wheel incarnation?

At any rate, they are really nice wheels. Anyone want to take 'em off my hands?

[B17overhead]

Jongbloed of this type have 18 bolt holes not 16 as pictured. Jongbloed magnesium center castings also always had a type number like 202, for instance. I vote for these wheels as "not Jongbloed". Also, Jongbloed of this vintage always started out as o-ring, but over the years, most people discarded the o-rings and RTV'd the 3 pieces together along the OD of the center casting.

[march718]

These wheels are either Ralt or March fitment and its the drive peg size that will dictate what they will fit.
Measuring the wheel nut washer face area will be useful too

[RSS]

Pretty sure they came off this car.

https://www.apexspeed.com/forums/sho...981-ADL-Magnum

Question is what happened to the car?