Water swirl pot

[99sh]

Looking for a water swirl pot. Dimensions roughly 8"L x 3" diameter (1.0 L capacity). Looking for the inlet to come in at a 45 degree and outlet straight down. Inlet/outlet need to be 1.0" OD

Arax

Something like this, but overflow fitting should be inline with the inlet side. Too bad this one only comes with 1.25" hose config.

[J Leonard]

Saldana racing products has an 8.5 x 3 tank that they could probably put your in, out and neck on as a custom order. They do nice work. I have 2 cars with custom radiators and a custom water expansion tank.

[alangbaker]

Check out:

http://www.obpltd.com/Alloy-Products...-Pot-OBPWSP003

It has 1.25" inlet and outlet, but reducing/expanding silicone hose is easily found.

[99sh]

Using reducing hoses was my 2nd option. The 2 hoses and a union coupler is about $65 (the union also adds another clamp that can fail). I'd prefer getting a new swirl pot with the right size for $100.

I was looking at this piece:
https://www.ahfabrications.com/produ...products_id=48

I'll take a look at the Saldana Racing.

[BorkRacing]

Using reducing hoses was my 2nd option. The 2 hoses and a union coupler is about $65 (the union also adds another clamp that can fail). I'd prefer getting a new swirl pot with the right size for $100.

I was looking at this piece:
https://www.ahfabrications.com/produ...products_id=48

I got this one from Demon Tweeks. Here in 3 days UPS

Robby

[CGOffroad]

I'll take a look at the Saldana Racing.

Thumbs up for Dave at Saldana. They built a radiator for me a year or so ago. I had prompt communications with them and the radiator is great. i wouldn't hesitate to use them again.

[Fred Michael]

Another vote for Saldana, if they don't have it in their catalog, they will make whatever you need at a very reasonable price. Quality stuff.

[99sh]

Thanks for the reference guys. Swirl pot came in Monday from Dave

[DK540]

For future reference, Pegasus now stocks two OBP items made in the UK, and check out these guys:
https://www.merlinmotorsport.co.uk/s...and-swirl-pots

Dave

[10rmotor]

I can build aluminum header tanks to your specs. Just made one for a customer in Florida. Just send me a PM.

[Fred Michael]

I can build aluminum header tanks to your specs. Just made one for a customer in Florida. Just send me a PM.

And it will be top quality

[10rmotor]

And it will be top quality

Thanks Fred!