1985 VanDiemen RF85 for sale

[MikesVD]

Reduced Price For sale is my RF85 Van Diemen. This car has been used for autocrossing for the last ten years. It could be converted to use for vintage road racing with the addition of a fire system and updated belts. The motor is a recent rebuild with new pistons and cam and has less than 10 hours use. The motor does have 20 over pistons which were installed to match the existing bore. The car is in good condition, located in Louisville Kentucky. New Price Asking $9,300. Would sell as a roller for $7,000.

[-pru-]

The motor does have 20 over pistons which were installed to match the existing bore.

Mike,

Thank you for your disclosure regarding the pistons.
As a reminder, for SCCA FF and CM, the rules only allow for a 5 over pistons.
From the SCCA GCR:

e. Pistons
1. Standard or 0.005 inch oversize pistons shall be used.
2. Standard size AE pistons P/N 18649, casting P/N 18634, standard
size CP piston, part # 81-2 FF1600, or CP oversize piston,
part # 81-2- FF1600+5 may be used.

Take care,

[Bud Pug]

The FRCCA allows .020 pistons in their "Club Classes" C/F Tyro - F/1600 and the F/PA divisions. FRCCA is a NE Region. Call Andy for more info 201-665-8682.

[EricP]

This could run in SVRA PostClubFord also, given the general rules allow 0.047” overbore. I can’t find a recent copy of the SVRA FF Rulebook but I’m guessing if you disclosed it at entry, they wouldn’t turn you away. Nice looking little FF...

[MikesVD]

Thanks everyone for the input.

[tdf4golf]

Nice looking car with a tasteful paint scheme. Clean condition and kudos for the full disclosure on the bore size. Based on the forgoing I think that someone will be getting a nice car from the seller.

Tom

[RTP]

Hello. Interested. Have you sold the car? Thanks

[MikesVD]

RTP,

Car is still available. Let me know if you have any questions.

Mike S

[Ncovington]

RTP,

Car is still available. Let me know if you have any questions.

Mike S

Hello, we currently run CAM T and are exploring the idea of running a MOD instead (likely F Mod). Is the cockpit big enough for a full grown man (5'10" and 210 pounds). Also and most importantly, we have strict sound restrictions, 96 DB at 50 feet. Any insight into whether or not this might meet that requirement or if exhaust could be quieted without limiting performance?

[CM/FFdriver]

I the sound thing is not a big deal with the 1600 ford engine, Honda I'm not sure about what db they run, I run at 94 to 96 db all the time with this muffler.
https://burnsstainless.com/collectio...=8112241049691

If it starts to go over sound it is usually the packing in the muffler which is replaceable

Ben

[MikesVD]

Hello, we currently run CAM T and are exploring the idea of running a MOD instead (likely F Mod). Is the cockpit big enough for a full grown man (5'10" and 210 pounds). Also and most importantly, we have strict sound restrictions, 96 DB at 50 feet. Any insight into whether or not this might meet that requirement or if exhaust could be quieted without limiting performance?

96 db can easily be met with a muffler I use on the car. I have a friend who drives an 86 VD almost identical to my car who is 6'2" and weighs around 220 lbs. You would need to make seat adjustments to my car, I weigh 160 lbs and I am 5'9".

[David Clubine]

This could run in SVRA PostClubFord also, given the general rules allow 0.047” overbore. I can’t find a recent copy of the SVRA FF Rulebook but I’m guessing if you disclosed it at entry, they wouldn’t turn you away. Nice looking little FF...

SVRA rules don't have a provision for that, max bore 3.200", and specific pistons that can be used. Same rules as SCCA etc.

[MikesVD]

SVRA rules don't have a provision for that, max bore 3.200", and specific pistons that can be used. Same rules as SCCA etc.

Yes, SVRA follows SCCA rules. But you would want to check with Rick Parent rick@svra.com to find out if disclosing would allow the car to run in the FF PCA group.

[RTP]

Hello again
I apologise for not contacting you earlier
I am staying in Indianapolis and would like to view at the weekend.
Is the car still available?
Cheers

[MikesVD]

RTP

Sorry for the delay in replying. Yes, the car is still available. I keep the car in my friends airplane hangar. I would have to contact him to see if we could get in to view the car tomorrow, since that is all that is left of the weekend. Let me know if Sunday before 2pm works for you. If so I will get in touch with him.

Mike S

[RTP]

Hello Mike
Can you give me a telephone contact number? Cheers

[MikesVD]

RTP

My cell number is 502-709-1739

Mike S

[Gtowns]

Reduced Price For sale is my RF85 Van Diemen. This car has been used for autocrossing for the last ten years. It could be converted to use for vintage road racing with the addition of a fire system and updated belts. The motor is a recent rebuild with new pistons and cam and has less than 10 hours use. The motor does have 20 over pistons which were installed to match the existing bore. The car is in good condition, located in Louisville Kentucky. New Price Asking $9,300. Would sell as a roller for $7,000.

I'm looking for a autocross car, is your car still for sale.
Thanks George.

[bassracer]

I believe this car sold and went to WI

[Gtowns]

Thank You

[MikesVD]

I'm looking for a autocross car, is your car still for sale.
Thanks George.

Sorry but the car was sold.