Kodiak 10" diameter rim halves and centers wanted

[B17overhead]

Kodiak had some bad luck with making rims for F500/600, so they totally discontinued making 10" rims. I have some for a car that require rim halves and centers to be complete.
Anyone have any good used or new Kodiak 10" rim halves? 4 on 4" centers?

Thanks!
Chuck92875624eightnine

[yoitsmatt]

Kodiak had some bad luck with making rims for F500/600, so they totally discontinued making 10" rims. I have some for a car that require rim halves and centers to be complete.
Anyone have any good used or new Kodiak 10" rim halves? 4 on 4" centers?

Thanks!
Chuck92875624eightnine

are these similar to Keiser? they don't make them anymore either(went to a 6 bolt design) but he did sell me blanks that are not drilled so i could make my own

[B17overhead]

Thanks for information. I called Kodiak about 5 mo ago and they said they didn't make any 10" parts anymore.
Did you get undrilled centers or rim halves from them or was it from Keizer?
Perhaps whatever they had left over?

Keizer are so cheap and well made, I should just buy more Keizers, but I already have a set of 4 complete good Kodiaks, 2x 8.25 and 2x 7 (4on4) and wanted to at least get some wider front halves to have a spare set that was closer to my square on all 4 corners Keizers. Kodiak are a little lighter than the Keizer's, I believe.

I'll sell the Kodiaks I have, if you are interested.

[yoitsmatt]

Thanks for information. I called Kodiak about 5 mo ago and they said they didn't make any 10" parts anymore.
Did you get undrilled centers or rim halves from them or was it from Keizer?
Perhaps whatever they had left over?

Keizer are so cheap and well made, I should just buy more Keizers, but I already have a set of 4 complete good Kodiaks, 2x 8.25 and 2x 7 (4on4) and wanted to at least get some wider front halves to have a spare set that was closer to my square on all 4 corners Keizers. Kodiak are a little lighter than the Keizer's, I believe.

I'll sell the Kodiaks I have, if you are interested.

keizer has wheels but now on 6 bolt hubs, they dont make 4 on 4 anymore and dont make half sizes because the new centers are 1/2 inch assembled so you can stack to get that extra 1/2 if needed, but he could sell me 2- 3 inch outer halves so i can run the bigger front tires, the blanks have no holes i asked him to punch out the valve stem holes , so i will have to drill and cut the center to make them work, they were about $35 each so i said why not try.

[87gti]

Kodiak had some bad luck with making rims for F500/600, so they totally discontinued making 10" rims. I have some for a car that require rim halves and centers to be complete.
Anyone have any good used or new Kodiak 10" rim halves? 4 on 4" centers?

Thanks!
Chuck92875624eightnine

pm me. I tried to send you a text about some jongbloeds I have