Results 1 to 27 of 27
  1. #1
    Member
    Join Date
    02.20.09
    Location
    Atkinson NH
    Posts
    16
    Liked: 1

    For Sale 1987 Red Devil T87

    For sale chassis T87-1, lay down model with 494 Non Rave. Original "Hinged chassis" was repaired, reinforced, and wheel base was lengthened to 79.5 inches, when converted to the Rotax engine. Many updates that include: New Polaris primary and Artic Cat roller secondary from QRE. Poly chain drive with new spare belt. New custom 4130 rear axle. Four gallon aluminum tank.

    Final drive ratio is set up for road racing as I build as a track day car. Should be easy to change sprockets to achieve auto cross ratios. It has one set of mounted R25s, one set of mounted rains, 2 sets of scuffed R25s, plus includes many spares and tools. The car has 7 track days and 2 autocrosses since rebuild and has been proven reliable and good handling. I have original log books, and car history.

    Estimated weight in the logbook is 570 lbs. without fuel and driver. Even with the mods I would still think it would still be under 600 lbm

    I also have 1 440 Kawi for sale:

    Complete engine has been Sold
    Still available, older but un fired Quadrini rebuild with receipt (I verified it with Mike) with a PWS starter, no carbs, water pump, partial electronics.

    Asking $2500 for the car and spares.

    $200 for each engine.

    Attached Images Attached Images
    Last edited by jlwhorf; 06.12.17 at 11:58 AM. Reason: Added pics and weight

  2. The following members LIKED this post:


  3. #2
    Junior Member
    Join Date
    09.07.08
    Location
    kansas
    Posts
    2
    Liked: 0

    Default

    Tempting, probably a good thing it is so far away or I would have to figure out how to put something else in the garage.

  4. #3
    Member
    Join Date
    08.21.01
    Location
    Northern NY
    Posts
    11
    Liked: 0

    Default

    Is the bodywork easily removable? Pictures?
    What is the empty weight?
    Thank you.

  5. #4
    Member
    Join Date
    02.20.09
    Location
    Atkinson NH
    Posts
    16
    Liked: 1

    Default

    Quote Originally Posted by adirondack View Post
    Is the bodywork easily removable? Pictures?
    What is the empty weight?
    Thank you.
    I will take pictures for you with the body work off, give me a couple of days to post them.

    I have not had this car on scales. I can provide the weight listed in the latest log book when it was run with a 440.

    The main chassis has not been modified, but there is added weight with the 494 replacement, custom engine plate, thicker tubing for the swing arm, and the reinforcement to the driveline cradle. If the dry weight is really needed, I should be able to rent a hoist scale.


    Thanks

    Jonathan

  6. #5
    Contributing Member captaineddie1975's Avatar
    Join Date
    04.06.05
    Location
    Norwich CT
    Posts
    355
    Liked: 19

    Default T87 Red Devil

    In the logbooks does it show my name as being one of the drivers back in 2005? Someone thinks this is my old car and I don't think it is.
    Ed Capullo

  7. #6
    Member
    Join Date
    02.20.09
    Location
    Atkinson NH
    Posts
    16
    Liked: 1

    Default

    Quote Originally Posted by captaineddie1975 View Post
    In the logbooks does it show my name as being one of the drivers back in 2005? Someone thinks this is my old car and I don't think it is.
    Ed Capullo
    Hi Ed,

    You are correct, you did not own this car.

    Jonathan

  8. #7
    Member
    Join Date
    02.20.09
    Location
    Atkinson NH
    Posts
    16
    Liked: 1

    Default

    Quote Originally Posted by adirondack View Post
    Is the bodywork easily removable? Pictures?
    What is the empty weight?
    Thank you.
    The estimated weight in the log book is 570 lbs. with out fuel or driver. Even with the mods I would still think it would be under 600 lbs.
    Attached Images Attached Images

  9. #8
    Member
    Join Date
    02.20.09
    Location
    Atkinson NH
    Posts
    16
    Liked: 1

    Default

    Both Engines have been sold. Car and spares are still available.
    Last edited by jlwhorf; 12.04.17 at 9:57 AM. Reason: update

  10. #9
    Member
    Join Date
    03.05.17
    Location
    Tampa, Florida
    Posts
    44
    Liked: 3

    Default

    Quote Originally Posted by jlwhorf View Post
    Complete kawi engine sold. Rebuild engine and car still available.
    I have a Kawi 440/Pipes and a ton of parts if you need it for this that is still good. Doing a conversion to a bike motor.

  11. #10
    Member
    Join Date
    02.20.09
    Location
    Atkinson NH
    Posts
    16
    Liked: 1

    Default

    Quote Originally Posted by ApolloKnight View Post
    I have a Kawi 440/Pipes and a ton of parts if you need it for this that is still good. Doing a conversion to a bike motor.
    Thanks for the offer, but I am looking to downsize my collection.

  12. #11
    Member
    Join Date
    09.10.17
    Location
    Fredericksburg, VA
    Posts
    9
    Liked: 1

    Default f500 for sale

    Is this car still available and will it hold me, 6'-2" and 210 lbs.

    Thanks,
    Lighthorse

  13. #12
    Member
    Join Date
    02.20.09
    Location
    Atkinson NH
    Posts
    16
    Liked: 1

    Default

    Quote Originally Posted by Lighthorse View Post
    Is this car still available and will it hold me, 6'-2" and 210 lbs.

    Thanks,
    Lighthorse
    Yes the car is still available I am 5'10 and was 210 when I bought the car, the fit was comfortable with a little room to spare. There is also room to move the pedals forward too. The best answer I can tell you is most likely.

  14. #13
    Member
    Join Date
    09.10.17
    Location
    Fredericksburg, VA
    Posts
    9
    Liked: 1

    Default f500 red devil

    [QUOTE=jlwhorf;545141]Yes the car is still available I am 5'10 and was 210 when I bought the car, the fit was comfortable with a little room to spare. There is also room to move the pedals forward too. The best answer I can tell you is most likely.[/Q


    It appears that the body work has been been replaced. Is the original body still available?

    Thanks for the info,
    Lighthorse

  15. #14
    Member
    Join Date
    02.20.09
    Location
    Atkinson NH
    Posts
    16
    Liked: 1

    Default

    [QUOTE=Lighthorse;545178]
    Quote Originally Posted by jlwhorf View Post
    Yes the car is still available I am 5'10 and was 210 when I bought the car, the fit was comfortable with a little room to spare. There is also room to move the pedals forward too. The best answer I can tell you is most likely.[/Q


    It appears that the body work has been been replaced. Is the original body still available?

    Thanks for the info,
    Lighthorse
    The original body work is not available. From the pictures in the log books, the body work was replaced in about 1990-91, and probably at the same time when the hoops where replaced.

  16. #15
    Junior Member
    Join Date
    09.26.17
    Location
    Orange County, California
    Posts
    1
    Liked: 0

    Default Interested in Car

    I am looking for a cheap formula 500, 440, or any cheap formula car preferably with a motorcycle or snowmobile engine (fine if not). It is going to be used by my high school's racing team to help teach some of the members how to drive competitively. It will be going to a good cause. This car fits the criteria perfectly. Please contact me at malekyehyamedia@gmail.com me and my team are very interested in this car.

  17. #16
    Member
    Join Date
    09.10.17
    Location
    Fredericksburg, VA
    Posts
    9
    Liked: 1

    Default Kawi 440

    Quote Originally Posted by ApolloKnight View Post
    I have a Kawi 440/Pipes and a ton of parts if you need it for this that is still good. Doing a conversion to a bike motor.
    What do you have and what are you asking?

    Lighthorse

  18. #17
    Member
    Join Date
    09.10.17
    Location
    Fredericksburg, VA
    Posts
    9
    Liked: 1

    Default

    Quote Originally Posted by Lighthorse View Post
    What do you have and what are you asking?

    Lighthorse

    Did you receive my private message?

    Lighthorse

  19. #18
    Member
    Join Date
    02.20.09
    Location
    Atkinson NH
    Posts
    16
    Liked: 1

    Default

    Quote Originally Posted by Lighthorse View Post
    Did you receive my private message?

    Lighthorse

    Second engine has been sold. Car and spares are still available.

  20. #19
    Member
    Join Date
    01.24.18
    Location
    Tulsa, Oklahoma
    Posts
    5
    Liked: 0

    Default Pipes

    Quote Originally Posted by ApolloKnight View Post
    I have a Kawi 440/Pipes and a ton of parts if you need it for this that is still good. Doing a conversion to a bike motor.
    I am looking for a set of 440 pipes

  21. #20
    Member
    Join Date
    02.20.09
    Location
    Atkinson NH
    Posts
    16
    Liked: 1

    Default

    Quote Originally Posted by shoundawg View Post
    I am looking for a set of 440 pipes
    My 440 pipes have been sold, try ApolloKnight

  22. #21
    Senior Member GAC's Avatar
    Join Date
    03.01.05
    Location
    Peoria, IL
    Posts
    356
    Liked: 91

    Default

    Do you have a trailer available to sell with it?

  23. #22
    Senior Member GAC's Avatar
    Join Date
    03.01.05
    Location
    Peoria, IL
    Posts
    356
    Liked: 91

    Default

    Is the car and roll cage completely SCCA legal for club racing?

  24. #23
    Member
    Join Date
    02.20.09
    Location
    Atkinson NH
    Posts
    16
    Liked: 1

    Default

    Quote Originally Posted by GAC View Post
    Is the car and roll cage completely SCCA legal for club racing?
    No, the roll bar has been updated but the foot box an fuel cell has not. In order to correct the foot box, the seating angle would need to be changed too, this would require the hoop to be raised.

  25. #24
    Member
    Join Date
    02.20.09
    Location
    Atkinson NH
    Posts
    16
    Liked: 1

    Default New Price

    $1500 car and spares $1500 local pickup only in southern New Hampshire

  26. #25
    Member
    Join Date
    03.16.20
    Location
    Paloma, Illinois
    Posts
    5
    Liked: 2

    Default

    Quote Originally Posted by jlwhorf View Post
    $1500 car and spares $1500 local pickup only in southern New Hampshire

    Do you still have? Thanks

  27. #26
    Senior Member
    Join Date
    10.24.12
    Location
    Charlotte, NC
    Posts
    596
    Liked: 227

    Default

    Quote Originally Posted by Christian Miles Racing View Post
    Do you still have? Thanks
    This car will need significant additional investment if you plan to road race in SCCA F500.

    Cory

  28. #27
    Member
    Join Date
    12.13.16
    Location
    Overland Park, KS
    Posts
    45
    Liked: 8

    Default

    Did this bargain basement starter car ever sell?

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  




About Us
Since 2000, ApexSpeed.com has been the go-to place for amateur road racing enthusiasts, bringing together a friendly community of racers, fans, and industry professionals. We're all about creating a space where people can connect, share knowledge, and exchange parts and vehicles, with a focus on specific race cars, classes, series, and events. Our community includes all major purpose-built road racing classes, like the Sports Car Club of America (SCCA) and various pro series across North America and beyond. At ApexSpeed, we're passionate about amateur motorsports and are dedicated to helping our community have fun and grow while creating lasting memories on and off the track.
Social