Results 1 to 20 of 20
  1. #1
    Contributing Member
    Join Date
    09.05.02
    Location
    New Mexico
    Posts
    60
    Liked: 13

    Default RF98 NovaRace F1000

    AttachRF98 NovaRace F1000

    $28k or Best Offer

    I have a RF98 Van Diemen that has a NovaRace F1000 conversion package; it has never been run. I bought the RF98 from Mike Sauce in 2007. Mike had stripped the car to the frame and strengthened it, put a fresh silver powder coat and belly pan bonded and riveted to it. Car is fitted with a raised nose that has a Dallara F3 front wing assembly. It has an adjustable front sway bar with a Comprent adjuster. I also got with the basic NovaRace kit; the engine mounting kit (2006), cooling kit, ceramic coated exhaust kit, shift kit(paddle shift) and air box. The engine cover and the RF 98 nova conversion cooling is by Mike Devins of HRP. The engine and wiring harness were built by George Dean Racing and have zero hours. The Penske shocks were built by Joe Stimola before he passed away. It has an AIM MyChron3 Dash.The car just needs to be finished and raced; the car is 99% there and need some finish assembly.

    Comes with:

    Two full sets of Oz wheels.
    Rear set of Oz wheels with Hoosier rains.
    Extra set of side pods.
    Spare diffuser.
    One spare new nose raised style.
    One spare new nose low style.
    Spare rear sway bar.
    Front upright.
    Rear upright.
    Left front lower arm.
    Right front lower arm.
    Toe link front.
    Toe link rear.
    Rear lower arm left.
    Rear lower arm right.
    Two rear upper arms left or right.
    One spare shock cover.
    Half shafts left and right.
    Alignment shims front and rear and alignment bars.
    And more suspension spares.
    Gyro dynamics rear jack.
    New set of motorcycle rims that need to be finished machining for transport wheels.

    Car is located in New Mexico.
    Ed Soenke
    EHSENT@Windstream.net
    505-685-4775
    Attached Images Attached Images
    Last edited by High Desert Racing; 03.02.16 at 7:43 PM. Reason: Added My Rear Cover Done by Mike Devins

  2. The following 3 users liked this post:


  3. #2
    Senior Member TDI PILOT's Avatar
    Join Date
    10.13.13
    Location
    Lapeer, MI
    Posts
    336
    Liked: 91

    Default

    That is a great air box design. Bump for a great buy!

  4. #3
    Contributing Member Jnovak's Avatar
    Join Date
    12.08.07
    Location
    Dearborn, Michigan
    Posts
    3,787
    Liked: 896

    Default

    Quote Originally Posted by TDI PILOT View Post
    That is a great air box design. Bump for a great buy!
    That is our standard airbox for the Suzuki engine. Could easily be adapted to other motors IMO.
    Thanks ... Jay Novak
    313-445-4047
    On my 54th year as an SCCA member
    with a special thanks to every SCCA worker (NONE OF US WOULD RACE WITHOUT THE WORKERS)

  5. The following members LIKED this post:

    BLS

  6. #4
    Senior Member
    Join Date
    04.30.11
    Location
    NC
    Posts
    1,356
    Liked: 304

    Default

    Jay, for future reference, what is the bend radius and tubing size your design is mated to?

  7. #5
    Contributing Member Jnovak's Avatar
    Join Date
    12.08.07
    Location
    Dearborn, Michigan
    Posts
    3,787
    Liked: 896

    Default

    Quote Originally Posted by BLS View Post
    Jay, for future reference, what is the bend radius and tubing size your design is mated to?
    The major bent tubes are all 1.25" diameter with a 4" bend radius.
    Thanks ... Jay Novak
    313-445-4047
    On my 54th year as an SCCA member
    with a special thanks to every SCCA worker (NONE OF US WOULD RACE WITHOUT THE WORKERS)

  8. #6
    Senior Member
    Join Date
    04.30.11
    Location
    NC
    Posts
    1,356
    Liked: 304

    Default

    Thanks, won't work for what I had in mind....

  9. #7
    Contributing Member
    Join Date
    09.05.02
    Location
    New Mexico
    Posts
    60
    Liked: 13

    Default Price Reduced

    New Price: $25k or Best Offer

  10. The following members LIKED this post:


  11. #8
    Contributing Member
    Join Date
    09.05.02
    Location
    New Mexico
    Posts
    60
    Liked: 13

    Default Price Reduced

    New Price: $22k or best offer

  12. #9
    Contributing Member Jnovak's Avatar
    Join Date
    12.08.07
    Location
    Dearborn, Michigan
    Posts
    3,787
    Liked: 896

    Default

    Quote Originally Posted by High Desert Racing View Post
    New Price: $22k or best offer
    This is a major deal. These cars have won a ton of races and one of them has been on the podium at the Runoffs and has won the Pro F1000 Championship.

    We also have some updates that make them even better.
    Thanks ... Jay Novak
    313-445-4047
    On my 54th year as an SCCA member
    with a special thanks to every SCCA worker (NONE OF US WOULD RACE WITHOUT THE WORKERS)

  13. #10
    Contributing Member
    Join Date
    09.05.02
    Location
    New Mexico
    Posts
    60
    Liked: 13

    Default Price Reduced

    New Price: $20K of best offer.
    Somebody needs to enjoy racing this car!

  14. The following 2 users liked this post:


  15. #11
    Classifieds Super License Messenger Racing's Avatar
    Join Date
    08.25.03
    Location
    Muleshoe, Texas USA
    Posts
    1,018
    Liked: 160

    Default Great P2 project there

    Or if someone is interested I have a new Viking/Beasley Carbon kit to convert to P2 - all you have to do is build the aluminum sidepod floors and fit it.


    Jay

    806-946-7252
    RaceDog
    Messenger Racing
    Muleshoe, Texas USA

  16. #12
    Contributing Member Jnovak's Avatar
    Join Date
    12.08.07
    Location
    Dearborn, Michigan
    Posts
    3,787
    Liked: 896

    Default

    Quote Originally Posted by high desert racing View Post
    new price: $20k of best offer.
    Somebody needs to enjoy racing this car!
    a fabulous deal!
    Thanks ... Jay Novak
    313-445-4047
    On my 54th year as an SCCA member
    with a special thanks to every SCCA worker (NONE OF US WOULD RACE WITHOUT THE WORKERS)

  17. #13
    Contributing Member
    Join Date
    09.05.02
    Location
    New Mexico
    Posts
    60
    Liked: 13

    Default Price Reduced

    New Price $18K.
    A lot of car for the money!

  18. #14
    Contributing Member
    Join Date
    09.05.02
    Location
    New Mexico
    Posts
    60
    Liked: 13

    Default New Price

    New Price:
    15k for the car

  19. #15
    Senior Member Dan Lipperini Jr's Avatar
    Join Date
    02.17.03
    Location
    Dallas, PA
    Posts
    173
    Liked: 64

    Default

    If I could sell either the V-8 Miata or Rotus 7 with 13-B turbo, I'd be making the drive to pick this up. Should sell very quickly at that price.
    Dan Lipperini Jr

    www.RaceLabz.com

  20. The following members LIKED this post:


  21. #16
    Senior Member S. Frebert's Avatar
    Join Date
    09.14.13
    Location
    Hagerstown, MD
    Posts
    312
    Liked: 74

    Default

    Is this still available? I couldn't imagine hahah

  22. #17
    Contributing Member
    Join Date
    09.05.02
    Location
    New Mexico
    Posts
    60
    Liked: 13

    Default

    Yes, it is still available.

  23. The following members LIKED this post:


  24. #18
    Banned
    Join Date
    09.12.16
    Location
    socal
    Posts
    1
    Liked: 0

    Default

    Quote Originally Posted by High Desert Racing View Post
    Yes, it is still available.
    whats your best price?

  25. #19
    Senior Member Dan Lipperini Jr's Avatar
    Join Date
    02.17.03
    Location
    Dallas, PA
    Posts
    173
    Liked: 64

    Default

    Be careful of the member inquiry above. See link below.

    http://www.apexspeed.com/forums/show...509#post526509
    Dan Lipperini Jr

    www.RaceLabz.com

  26. The following members LIKED this post:


  27. #20
    Contributing Member
    Join Date
    09.05.02
    Location
    New Mexico
    Posts
    60
    Liked: 13

    Default RF98 NovaRace F1000

    I am removing the car from the market.

    Thanks to everyone about the inquiries!!!!

    Ed Soenke

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  




About Us
Since 2000, ApexSpeed.com has been the go-to place for amateur road racing enthusiasts, bringing together a friendly community of racers, fans, and industry professionals. We're all about creating a space where people can connect, share knowledge, and exchange parts and vehicles, with a focus on specific race cars, classes, series, and events. Our community includes all major purpose-built road racing classes, like the Sports Car Club of America (SCCA) and various pro series across North America and beyond. At ApexSpeed, we're passionate about amateur motorsports and are dedicated to helping our community have fun and grow while creating lasting memories on and off the track.
Social