nutserts in a lola t324 chassis

[tonychilton]

I need to tighten (stop from spinning) the nutserts if that's what they are in my aluminum chassis. These are 10/32 inserts, but they don't look particularly like any I see when I look at Aircraft Spruce or Pegasus. The inserts are used to hold clamps for wiring and hydraulic lines.

Thanks for your help.

[Fred Michael]

Use a nutsert installation tool if you have one or a 10-32 screw and a jam nut if you don't and see if they will tighten up. If they won't, then replace them.