Winter 2015 FC Garage Sale

[greg pizzo]

I have more wishbones than any one guy needs to have!

2 brand new sets of wide track made with wide profile tube with all the staked bearings installed ONE is BLACK power coat and one one set is Grey powder coat
included will be new lower spherical retaining nuts for each (typically @ 55.00 ea.)
Grey set will include front track rods
BLACK set does not

Grey $3150.00 + shipping
Black $2950.00 + shipping


I have at least 2 sets of USED but nearly perfect wishbones that are typical OEM VD tube and finish, Again all will come with staked bearings as an added bonus these will come with NEW spherical nuts, and brake lines installed

$2500.00 + shipping

I also have a few wishbones that do not belong to a set that could go as singles, please inquire.

[Ben Beasley]

You might want to say make and year of car they are for? I'm kinda assuming late model VD?

[greg pizzo]

Ben

Thanks you are correct!
All of these 'bones are for the late model VD wide track fitment
if anyone is in need of pix I can send then upon request

The 2 new and 2 nearly new sets are in stock NOW and can be shipped likely MONDAY at this point since it is Friday unless the need is urgent I can get them out today, but more likely they would be packed up on the weekend and shipped Monday

added some sample pix if you'd like more just ask

[greg pizzo]

In honor of the 24 hour race !!

Free Shipping for the above mentioned SETS of wishbones with in the LOWER 48 states
Ground shipping!

Want to see these bone find a home ASAP

Buy 2 sets take another $400.00 off for both ! ($200 each)

This includes the 4 lower wishbones with NEW nuts each set
ONE set with toe links (GREY) ONE with out (BLACK)

Used set will come with NEW NUTS AS WELL !
Used set is OEM VD style not wide aero tube and Brake lines installed ! ready to install !

[greg pizzo]

still have some of these bones available !

[greg pizzo]

Have sets of parts ready to ship

complete uprights with or with out bearings bearings shown are off the shelf condition New but steel balls no prep. Bearings can be prepped with Si3N4 (silocon nitrite) balls and micro polished if desired,

bare uprights start at $450.00 can be grouped for a discount in sets.
Also shown is lower wishbone nut (drilled six ways for safety wire) $36.00

[greg pizzo]

Have 2 pristine 8" 5 spoke OZ MAGNESIUM wheels for sale
come with aluminum valve stems
NO tires just bare wheels

Rear wheels for Late model VD cars NOT mid year cars
perfectly straight and true

paint in great shape only a few nicks from typical mounting of tires etc ..

Very hard to come by in this condition
gone

[iamuwere]

Some one buy these from Greg!

Jim

[havocjody]

Been trying to reach you... Please call us about the parts 815-476-4180

[greg pizzo]

bump

[greg pizzo]

bump

[greg pizzo]

bump

[greg pizzo]

new price VERY nice OZ wheels !!

[greg pizzo]

bump for

nice new wishbones that need a new home
still have a lot of very nice almost new bones as well !

[greg pizzo]

bump

[greg pizzo]

really like to find a new home for these excellent wheels

[greg pizzo]

many bones need new home !
great for up coming Runoffs !!

[quickmag]

PM sent.

[greg pizzo]

PM returned or email me at sales@velocityhaus.com
call me at (408) 832-3114

[Chuck Moran]

Do you know if they will fit? My old wheels measure 4" from the back edge of the wheel to the mounting face.

Have 2 pristine 8" 5 spoke OZ MAGNESIUM wheels for sale
come with aluminum valve stems
NO tires just bare wheels

Rear wheels for Late model VD cars NOT mid year cars
perfectly straight and true

paint in great shape only a few nicks from typical mounting of tires etc ..

Very hard to come by in this condition

ready to ship NOW
BUY BOTH FOR $750.00 + shipping

[Chuck Moran]

They will fit my RF99. My existing wheels measure 4" from the inside edge to the mounting face.

Also: How quickly could you ship them to me.

[greg pizzo]

Chuck you have emails

[greg pizzo]

I have way too many rear wing parts
mounts, flaps, all types of elements a couple of sets of end plates

AERO washers etc

Black M6 Aero washers $4.95 ea discounts for sets
Rear upper elements from $190.00 each High speed for Daytona !!
Rear lower mount/elements $550.00


buy more than one and I will ship free to the lower 48 !!

[greg pizzo]

Assembled once and ran for a 15 lap test day (short due to engine issues)
since then have sat on the shelf thinking may have to use them as rules in some series did specify these parts. That issue as now gone away.

Since then we run our own stuff on both ends of the axles!

As you see the parts below are $1084.00 from the Primus listings
Tripod CV bearings are brand new the rest are used just the one test day and nearly new

$680.00 shipped
$70.00 for each tripod New or $250.00 for the set 4 of tripods shipped

Ready to ship today !

maybe not obvious but these Tripods will work on most FC or F1600 cars as well not just VD cars

[greg pizzo]

Still have some need to move them out !

[greg pizzo]

make me an offer still need to move these out

[greg pizzo]

more available !

[tdf4golf]

Nice looking work! I love the way technology and craftsmanship looks. It's one of the reasons I love race cars, now I need to get another car to put them on.

Tom

[greg pizzo]

I have a set of LATE MODEL VD FC fitment Magnesium OZ wheels 13x6 and 13x8
Great shape currently have tires on them that will be removed to facilitate shipping

$1180.00 + your choice shipping

very nice and true wheels Barely used !

will send pics upon request

these are 12 spoke very light MAGNESIUM wheels

[dillybar]

still available?

[greg pizzo]

VD Wheel bearings from OEM stock to wild with ceramic balls
Starting at $85.00 each $79.90 in sets of 4 and $74.90 in sets of 8

As well we have NEW tripod bearings for sale
$64.00 each $58.75 each in sets of 4 and $55.34 in sets of 8

[greg pizzo]

bump

[greg pizzo]

bump

[greg pizzo]

bump new price

[greg pizzo]

Just completed new toe bar assemblies for late model VD cars

Bars will be 28mm carbon fiber 3K twill matte finish with bonded aluminum end caps anodized red and blue to be sure they are always assembled the same way to improve reliability of measurements/

Complete assemblies will be $625.00 plus the shipping of your choice to the lower 48.


Custom die-cut foam in a Pelican case just like we do for our set-up wheels and toe bar assemblies for our GT clients will be available on request at $240.00 complete (top shelf stuff, FYI the Pelican case is $190 of that cost).

These are in stock NOW and ready to box and ship!

Pelican cases will take 1-2 weeks to produce if desired

These are complete turn-key assemblies, not a kit to assemble

We can also make similar to fit other cars upon request

[greg pizzo]

The promised pictures
If purchased the tires can be dismounted if not needed to reduce shipping charges

(shipping of wheels will be in 2 boxes 2 wheels each USPS 2 day delivery about $54.00 to the lower 48 states)

Like to get the room on the shop

These are VERY nice wheels AND most importantly light Magnesium

[greg pizzo]

DP08 nose cone with honeycomb structure
New front wing pylon
near perfect condition

$425.00 + shipping of your choice

[greg pizzo]

2 complete LD200 REAR covers one WEBSTER one HEWLAND with welded on rear wing support upgrade

BOTH have plunger nut and springs installed complete ready to go on the car as is !


Webster $345.00
Hewland $375.00


shipping is your choice, You buy both I will ship on my dime

see attached pix

[jaxssnake]

GregI will take the cover. Credit card or check ok
Jack

[jaxssnake]

Greg PM sent