FF: Classifieds: Cars For Sale
FF: Classifieds: WantedLooking for a set of two 300lb or 250 lb springs , 3 in diameter by 4 in long for my 3 way adjustables.
Mark
Penski springs
Looking for a set of two 300lb or 250 lb springs , 3 in diameter by 4 in long for my 3 way adjustables.
Mark
1990 Van Diemen, the Racing Machine, CM AutoX, 2016 Frontier
You can try to make a street car into an autocrosser or you can do a lot less work and make a race car into a great autocrosser
You may want to look at Hypercoil or Eibach, not "Penski"
Will Velkoff
Van Diemen RF00 / Honda FF
Me guesses your looking for 2.25 inner diameter springs. Springs are measured by the inner diameter, not the outer.Originally Posted by mwizard
Oh,......No I in Penske
Stonebridge Sports & Classics ltd
15 Great Pasture Rd Danbury, CT. 06810 (203) 744-1120
www.cryosciencetechnologies.com
Cryogenic Processing · REM-ISF Processing · Race Prep & Driver Development
Hey Mark, I usually get springs from the shock shop, seems like they have about the best price. Yeah, new, probably more than used, but $159 for a pair isn't bad and you get them right away. YMMV. I'm pretty sure that the lowest Hyperco goes in a 4" long, 2 1/4 ID is 300#/in but I don't know about other brands.
Barry
Looks like Eibach only goes down to 500 Lb. Hypercoil lowest is 350 unless I want to go with 6 in and then I can get 300. I can make 6 in work.
Any other ideas?
Mark
1990 Van Diemen, the Racing Machine, CM AutoX, 2016 Frontier
You can try to make a street car into an autocrosser or you can do a lot less work and make a race car into a great autocrosser
And while I am at it, I ran the car with the front bar disconnected last wkend and got a slightly faster time. It was the first time I have ever experienced the front tires moving(independently). The surface was a bit rough, so I am going to test it again on concrete next wkend. I also got some interesting rear hop and wheel spin which was new and maybe due to the uneven pavement. I would like to try a less stiff front bar; is that an option? Where might I find one?
Mark
1990 Van Diemen, the Racing Machine, CM AutoX, 2016 Frontier
You can try to make a street car into an autocrosser or you can do a lot less work and make a race car into a great autocrosser
Great referral, Barry. They have Hyperco in 2.25x4 at 300 and in 6 in down to 200lb.
I will need to confirm 2.25 in.
Mark
1990 Van Diemen, the Racing Machine, CM AutoX, 2016 Frontier
You can try to make a street car into an autocrosser or you can do a lot less work and make a race car into a great autocrosser
BRITS
Mark,
Give BRITS a call in the morning. There should be someone there. They have a large selection of springs and may have what you are looking for.
http://britsinc.com/
“Racing makes heroin addiction look like a vague wish for something salty.” -Peter Egan
Thanks, Dan. I had not heard of these guys.
Mark
1990 Van Diemen, the Racing Machine, CM AutoX, 2016 Frontier
You can try to make a street car into an autocrosser or you can do a lot less work and make a race car into a great autocrosser
Hey Mark,
If you can make 6" springs work I have a pair of 2.25"x6" 250lb Eibachs. Sell/trade/loan whatever...
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Reply With Quote