Moving shops, clearing out most of FV parts, LOTS to go

[AVR_Shane]

**ALL PARTS SOLD**

Fire sale...everything must go. Make an offer. The more you take, the better deal I will give you on it. I will update the list daily.

Add shipping costs to the prices from Barrie, Ontario. Pickup can be in Barrie, Toronto area, or Bradford. Anyone attending the F1200 AGM can also pick up parts there.

all pictures here:
http://s238.photobucket.com/user/int...?sort=3&page=1

13 different lengths x Tie Rods / push rods - $5 with no rod ends, $8 with one rod end, $10 with two rod ends
2 upper, 3 lower x Turkey legs - $10 each for used
4 x built spindles (poor condition) - $5 each
2 x chrome pitman steering arm - $15 each
1 x 4-2-1 collector (mediocre condition) - $10
5 x Contact points set - FREE WITH PURCHASE OVER $20
7 x Bosch distributors - $25 each, with rotor $30 each, with cap $35 each
6 x distributor cap - $3 each
12 x link pins (used) - $3 each
1 x oil pump set - $15
3 x venturi stack (new) - $8 each
1 x clutch operating arm (new) - $3
2 x front ball joint backing plate (refurbished) - $5
11 x drum (front and rear) – pick your drum, $5
1 x input shaft - $5
3 x Vallis intake manifold - $150
1 x Kapelke intake manifold (same as ones used on big HP cars we have for sale, very close to rules, but still legal. Matches HP made by F1200 legal Autowerks) - $250
3 x steering boxes, good condition – used $20
4 x fuel pump – 1 old style $5, 3 new style used $10
5 x coils (used) – 4 Bosch $10 each, unknown brand $5
1 x oil pump block off plate - $3
1 x BRD front engine mount - $15
2 x oil filler neck, various types - $10 each
1 x box of used brake shoes - $20 for the lot
6 x fiberglass mufflers (actually work!) - $5 each
2 x valve cover (bail type) - $3 each
1 x box of pushrod tubes - $10
1 x 12V starter - $15
8 x silver slotted FV wheels with unusable rubber - $25 each
4 x F1200 wheels various styles with unusable rubber - $30 each
1 x Falken non-K tire, 6 weekends on it - $10


Oil coolers:
5 x 5 row VW cooler - $25 each
1 x 7 row VW cooler - $25
3 x Oil manifold block - $25 each
2 x Oil filter (new) - $5
5/7 row + manifold block + filter combo - $50


Shocks (from left to right)
2 x KYB - $10 each
1 x Fox (right side) - $20
6 x Stock - $7 each
3 x front Carreras - $15 each
2 x rear Carreras (no threaded sleeve) - $15 each
8 x unknown brand, all have compression - $3 each


Gauges
2 x mechanical temp gauges - $5 each
2 x mechanical pressure gauges - $5 each
1 x exhaust temp - $15

ADDITIONAL PARTS:
http://s238.photobucket.com/user/int...?sort=3&page=1
2 x BRD tails - $60 each
1 x right BRD scoop (some damage) - $10

[B Farnham]

I'll take the Ron chucks!

Thanks,
Brian

[AVR_Shane]

Brian, sorry, you were beat out by 2min by a PM for the Ron Chucks!

Anyone else claiming parts, PM or email is best to sviccary@avrmotorsports.com

[Amon]

Two minutes??? Seriously??? I hope the person who bought them, plans to actually use them instead of hoarding them which is becoming more common these days!

[Tiago Santos]

Haha.. I'm going for a walk with my dog, hopefully when I come back there will still be some stuff left!

By the way, there are new offset shock mounts being made.. PM me if you need a set. Those Ron Chucks were a great deal to whoever got them, though!

[lucky13]

Two minutes??? Seriously??? I hope the person who bought them, plans to actually use them instead of hoarding them which is becoming more common these days!

I got them, Mark. They are shaped differently than the ones I have on my car and I want to try them to see if they do anything to free up my shocks.....remember the binding issue I was having?

If they don't make a difference, I'll be glad to sell them to you/Brian for the same price I paid for them. In fact, even if I can't figure out if they make a difference or not and I want to keep them, Brian is welcome to use one of the sets as long as I don't break mine.

[Amon]

Thanks Matt! We really need a set and if they do work on your car, maybe Brian could buy your initial set?

Mark

[lucky13]

Thanks Matt! We really need a set and if they do work on your car, maybe Brian could buy your initial set?

Mark

We will figure out something and we will end up with a set on my car and a set on Brian's car.

[B Farnham]

We will figure out something and we will end up with a set on my car and a set on Brian's car.

Thanks Matt, I think that your shims may be why the front end is binding. We'll have to mess with your beam in the spring, I have some notes on how to set them up.

[lucky13]

Thanks Matt, I think that your shims may be why the front end is binding. We'll have to mess with your beam in the spring, I have some notes on how to set them up.

Things are much better now. I think I had a combination of too many shims and not enough grease working against me. I have more movement now but I don't know that it is a lot of movement and as quick as I would like but we'll see.

Sorry for hijacking your thread, Shane! If I want to talk about my front suspension any more, I'll start my own thread!!!

[AVR_Shane]

No problem Matt, hope the Ron chucks work out for you!

Back to the selling stuff part...list is currently up to date with what's still available!

[AVR_Shane]

Bump up

New prices in bold, additional bodywork parts at the bottom of the post.

[Jean-Sebastien Stoezel]

Hi Shane:

I sent you a PM earlier today. I'd like to get an update and shipping estimate for the parts I bought from you on November 25.

Regards,
Jean-Sebastien

Bump up

New prices in bold, additional bodywork parts at the bottom of the post.

[AVR_Shane]

Jean,
As I mentioned before, I've had some personal "obstacles" get in the way recently of me being able to get to the shop and retrieve the parts to ship. All parts purchased to date (including yours) have been shipped out as of Monday. I was told everything should arrive to their respective homes before Christmas.

No need for updated shipping estimate...I absorbed any extra costs that there were.

Hi Shane:

I sent you a PM earlier today. I'd like to get an update and shipping estimate for the parts I bought from you on November 25.

Regards,
Jean-Sebastien

[AVR_Shane]

Bump to top. List updated. Lots of things still available. Delivery can be made to the first regional weekend at Mosport next weekend.

[AVR_Shane]

Bump to top

EVERY PRICE has been slashed. The larger the order, the larger the discount (on top of the discount shown)

Better yet, make me an offer for the whole damn lot!

[Amon]

Shane,

I'll take the Clutch Operating arm and (1) good front drum and (1) rear German drum if available?

Mark

[AVR_Shane]

Shane,

I'll take the Clutch Operating arm and (1) good front drum and (1) rear German drum if available?

Mark

All yours. If you can PM me your shipping info, I'll check on the drums when I'm in there next, which will be next week. Shipment will go out end of next week as well.

[Jim Kleinklaus]

I am interested in a velocity stack to fit FV carb--if you have, how tall are they? thanks

[AVR_Shane]

I am interested in a velocity stack to fit FV carb--if you have, how tall are they? thanks

I'm heading in tonight to pick up some parts to ship out. I will take them with me and measure them for you.

On that note, anyone thinking about picking something up, today would be a good day to tell me since I'm heading to the shop this evening.

Also, any F1200 competitors, parts can be picked up at the track next weekend.