RedLine Weber carb Parts

[Jerry Poole]

Could anyone on the form please provide me with a knowledgeable rep or contact at the Weber Redline Company? Thanks Jerry

[HayesCages]

Not Redline but if you have a Weber question these guys can answer it.

www.piercemanifolds.com

[phantomjock]

Again not RedLine - but Jim Inglese KNOWS Webers. Most of his work is 8 stacks (built mine for the my monster 'vette), and I've found him an easy phone call and I'd bet he'd let you know if he could help you:
http://www.jiminglese.com/

Cheers - Jim

[brownslane]

Not Redline but if you have a Weber question these guys can answer it.

www.piercemanifolds.com

I had a TERRIBLE time with them some years back with triple 45's I built on a D-type replica. Got the wrong parts (mislabeled) a couple of times, and damaged parts once. I dealt with Doug, who I advised what parts I ordered, that they did not fit and that they must have a mis-labelling problem. What did I get? The same mis-labelled parts again. Again I called and emailed Doug, who never made things right...and frankly made it plain he did not care. ....I was really surprised.

I still have the twisted throttle shafts under my desk, along with the letters to Doug and Roger.

I am usually so impressed with the "average" race parts supplier; they get it...and always work hard to make things right. These dudes did not. All this happened back in 2002, so things may have changed in the intervening years. But I would not recommend them.


Good luck; there must be alternates to call.

Best, Tom

[HayesCages]

I called them a few months ago and they were very helpful even though we weren't buying anything from them.
I'll find out later this year as we have a pair of sand cast DC03's to rebuild.