TIG welding at VIR April 11-14th

[last]

Hi sports fans,
Just a note that I will be available for TIG welding services at the VIR pro series event, April 11-14th. I have my own machine & can do ferrous & non-ferrous metals (but not carbon fiber, not yet at least). Look for me at the Tim Kautz trailer, F1600 #88.
Looking forward to VIR
thanks, nick
www.fuhsfab.com

[John Robinson II]

Nick,
how about some Tig lessons?
See ya there.
John

[last]

Sure John, if there's time. Bring a welding helmet if you have one.

[Swift17]

Nick,
how about some Tig lessons?
See ya there.
John

Ummmm ... the two (2) time Nat'l Champion (retired) pipes in .......

[John Robinson II]

Have several, as well as mig, tig and stick welders.

EJ, I am not retired, that is for old people. If I was, there would not be any racecars in the shop just don't tell my wife

[Mike Scanlan]

I'll look you up. I have a cracked aluminum hinge on the trailer door. Can you get up near 200 amps? We failed at 125.

[problemchild]

I'll look you up. I have a cracked aluminum hinge on the trailer door. Can you get up near 200 amps? We failed at 125.

Like asking DaVinci to paint your house .....

[last]

Mike,
My machine does go to 200 amps, but I would need 20 amp 230 volt service. I don't know if anyone there will have that much amperage available from a generator, or if there are any 230v outlets in the garage. There is a race shop/team that is at the gate of VIR, they have let me use their shop before. So if we can find the needed power, I would be happy to help. BTW, smaller jobs I can run the machine on 110v household current. We might have a garage this weekend, (Kautz racing).
DaVinci ? LOL, thanks. Only happy to help.
nick

[BURKY]

Mike,
My machine does go to 200 amps, but I would need 20 amp 230 volt service. I don't know if anyone there will have that much amperage available from a generator, or if there are any 230v outlets in the garage. There is a race shop/team that is at the gate of VIR, they have let me use their shop before. So if we can find the needed power, I would be happy to help. BTW, smaller jobs I can run the machine on 110v household current. We might have a garage this weekend, (Kautz racing).
DaVinci ? LOL, thanks. Only happy to help.
nick

What about the R.V. power pole's?

[Mike Scanlan]

Same problem we have here at the shop. I'm in a garage and will look into it then. Thanks

[Bob Wheless]

i would think Victor Seaber and Cory Lind at Viper in the paddock would have the power source you would need ,,,,,,,, racers and will help anyone ,,, great guys