North American Engine Rebuilders...

[Canadian Formula 3 Championship]

I found this old 2004 thread (http://www.apexspeed.com/forums/showthread.php?t=10555) in the Atlantic section about the locations of engine rebuilders. I'm wondering if any other Apexers can expand on this?

I know some of the big names like Ilmor Engineering in Michigan, Roush Yates in Carolina, and the mid-sized McLaren Performance Tuning (MPT) in Michigan, Quicksilver in Maryland, or even smaller Alpine-America in Montreal.

But I'm sure there are many other engine rebuilders throughout the continent in different regions which some of you Apexers send your engines too. I would like to comprise a list of all high-end engine rebuilders in North America.

[Fred Michael]

Hasselgren
Loynings
Elite
Quicksilver
Jennings
All could handle it, I am sure there are others

[Canadian Formula 3 Championship]

yes, I forgot H, L but haven't heard of Elite nor Jennings.

[philippinemotorsports]

is there a engine builder here in manitoba or nearby?

[philippinemotorsports]

why worry about engine re-building here? this is north america, right? hot rods are build here from the ground up, from barely sheet metal to award winning masterpiece...

[Canadian Formula 3 Championship]

...almost 200 views but only 1 response with a list of engine rebuilders? I'm sure there are many more out there. Do state the ones you know with a website link if available and contribute to this list to make it grow which will only help everyone else here on Apex for future references.

[Charles Warner]

I'm sure there are many more out there.

Negative! That' a pretty complete list. There are those who might specialize a bit more - I.e. William Engine who specialize in FF/F2Lt - but that's a pretty comprehensive list of the upper-end builders in the US. If you want to to add the big guys - Bob Slade, Phil Reily, Chuck Cornelison, Ted Wenz, Peter Marcovici - you can but they deal with the larger vintage motors (DFV, DFX, etc.)

I would surmise that most of these guys would not want to mess with the F3 engines. Bertils is apparently out of the game.

[Canadian Formula 3 Championship]

really? I'm quite surprised, I thought that there would be more of them around. Does anyone have the contact information for Elite and Jennings? I have been looking around for a website but can't find one.

[Charles Warner]

really? I'm quite surprised, I thought that there would be more of them around. Does anyone have the contact information for Elite and Jennings? I have been looking around for a website but can't find one.

Do a Google search for Steve Jennings Racing and Elite Engines.

[Canadian Formula 3 Championship]

Seems simple enough! I was searching before, not sure why they didn't come up? thanks Charlie.

So then this is the Top 10 Engine Rebuilders (in no particular order) in North America for high-end racing engines, I'm taking it. If anyone else thinks of another whom is good, please contribute.

Ilmor Engineering, Inc.
43939 Plymouth Oaks Boulevard
Plymouth, MI 48170
734-456-3600
http://www.ilmor.com/

Roush Yates Performance Parts
261 Rolling Hill Road
Mooresville, NC 28117
704-658-1540
http://www.roushyatesparts.com/

McLaren Performance Technologies
32233 W. 8 Mile Road
Livonia, MI, 48152
248-477-6240
http://www.mclarenperformance.com/

QuickSilver RacEngines
4603 Wedgewood Boulevard
Frederick, MD 21703
301-698-9009
http://qsraceengines.com/

Hasselgren Engineering, Inc.
1221 4th Street
Berkeley, CA 94710
510-524 2485
http://hasselgren.com/

S. Jennings Racing, LLC.
352 South 1200 West
Tooele, UT 84074
435-843-1141
http://www.sjenningsracing.com/

Elite Engines
2875 E Progress Drive
Suite A
West Bend, WI 53095
262-306-1977
http://www.eliteengines.com/

Alpine-America
1765 Laurier Boulevard
Sainte-Madeleine, QC J0H 1S0
450-773-5539
http://www.alpine-america.qc.ca/

Loyning's Engine Service
9125 SE 64th Avenue
Portland, OR 97206
503-775-2999
http://www.loynings.com/

Bertil Racing Engines
40854 N IL Route 83
Antioch, IL 60002
No Number
No Website
Business Closed

[philippinemotorsports]

it seems that all are located in the US (except of course for the Alpine-America), and just one in Canada? seems odd though...

[Dave SanF 50]

Jay Ivey
4722 NE 148th Ave.

Portland, OR 97230

(503) 255-1123

Iveyengines@yahoo.com
http://www.iveyengines.com/

[Daryl DeArman]

Jay's a great engine builder, no doubt---but he's looking for a list of those respected builders building high-end engines.

[turnbaugh]

SSA
Houston, Texas
Honda K Series Innovators and Experts
Motorsports Southwest is the exclusive marketer for road racing in NA.

512-261-1462

[Canadian Formula 3 Championship]

All great suggestions, keep them coming! grow this Apex list, there must be good, qualified engine rebuilders in each geographic regional area of North America. Any suggestions in Canada...anyone?

[Charles Warner]

I would think the question is whether or not these guys would want to stock the required parts and go to the trouble of developing an F3 engine program. Even though the engines are not sealed it still takes a lot of development and infrastructure to work up a special engine program for just a few engines.

[Canadian Formula 3 Championship]

So is this now a final list of the top engine rebuilders in North America for engines of the such; Formula 3, Atlantic, F2000, etc., any more rebuilders that come to mind, any more in Canada?

[Paddy O'Brien]

Mr. CF3C, what engine builder in Canada have you been using to rebuild the motors on your cars?

[Canadian Formula 3 Championship]

We just started to ship the 1st car here this past spring, and 2 more will imported by Christmas time as we're working on those now. So we never needed a rebuild yet on any engines, and they're coming here fresh.

But since these engines are so reliable up to 6,000 mile rebuild intervals, I don't foresee us needing one anytime soon. I have already contacted a few rebuilders off that list trying to find the most suitable ones, need more options in Canada.

- Mr. CF3

[HayesCages]

Jay's a great engine builder, no doubt---but he's looking for a list of those respected builders building high-end engines.

I wouldn't say Jay Ivey isn't a "high-end" engine builder, I'd say Jay Ivey is a smart business man...

[Daryl DeArman]

^^^ Absolutely ^^^

My "high-end" comment referred to the "engine" not the "builder"

[tonyave]

Jay built the engines for David Empringham when he won the 93 Atlantic title.