Hello all,
I'm a new member here. I have been into & have owned AE86 Corollas with race spec engines for many many years. Over the years I have enjoyed a very good relationship with Paul Hasselgren which has resulted in me having a living room filled with Formula Atlantic 4AGE parts. I am almost finished building a new engine for my car & think it's time I started selling most, if not all of my spares. Some of these belong to a friend of mine but we're both located in the Pacifica / Daly City area & local pick up is welcome.
Brand new, unused FA engine. Built in 2007 as a spare, this engine saw a dyno run-in session, some power mapping sessions & then went into a container as a spare. It comes with a Pectel / Cosworth ECU ( already mapped ) & a new engine harness. At the time, this whole project cost in excess of $40,000 to put together. 240bhp at 10,200rpm.
I am asking $15,000.00 for the engine, ECU & engine harness. Many of you may realize that the ECU & harness make up almost $5,000.00 of the asking price. It does however have to be sold as a set.
Tilton twin disc race clutch & flywheel $1,200.00
F.A. Ralt. cam cover $500
Perfect condition TRD throttes with injectors $2,300.00
I have many more parts, both new & used. As an example, I have somewhere in the region of 10 crank shafts in need of light grinding & polishing. Each crank is $500.00. I got mine refinished by a shop in LA. It cost me $700.00 to have it ground, polished & a re-nitride service. I am happy to provide the information of the repairing shop if needed. New, this was a $3,500.00 crank.
I also have enough parts to put together some complete heads if there is interest. All heads are pre-ported, polished & have a Newen valve job. Can be sold either complete or as a bare head.
See below:
Before:
After:
My email address is billyedmonds@hotmail.com & my cell phone # is (415) 816-0672
Here is the engine I put together with the above parts: Be aware though, this engine is for a road car so the block was not strapped & I used a standard oil pump instead of a dry sump set up & cover.