Fired up the multi axis lathe today and cranked out these pretty slick 08 GSXR1000 fuel rail fittings. I know that Peter D makes something similar but I took it a few steps further. I didn't like the clutter of his...I'm a nut about packaging.
Machined in the -6 male fitting and put the 1/8-NPT hole at the top (for fuel pressure gauge). Also incorporated the anti rotation hex like stock. My design weighs less, has fewer parts keeping the bulk down and has less chance of leaking. Also made the thru bore larger than stock for added fuel flow.
Second photo are the remote oil pressure fittings I made. Several of the F1000 owners took advantage of this and picked up a set from me. M16 x 1.5 to -3 male....-3 male to 1/8-NPT.
If anybody needs one of these gems drop me a PM or email.
I have several other trick parts I'm working on, will keep everyone posted.
Gary Hickman
FB #76