Thought I'd post of few pics. of our latest change we made to the Edge F1000. New side pods, radiator, and oil cooler.
This all started after we towed 1,000 miles to High Plains Raceway Dbl. Nat. last July and had major cooling issues. Discovered we had marginal cooling capacity at 5,200 feet and 100 degree ambient temp. Now have 200 sq. in. of H2O and 220 sq. in. of oil cooler.
Also this is basically a brand new car from the one we ran last March at Thunderhill. We built a new frame, new suspension, new uprights, all in the quest to lower the weight of the car by 70 pounds.....now we have to balast the car to make minimum weight.
Machined some new wing flap molds this week, those are going on the car next week before we head to Willow Springs to test our Road Atlanta ARRC setup.
Special thanks to Dustin @ Phx. Race Works for the custom radiator and oil cooler. If you need a custom H2O or Oil Cooler give him a ring.
Extra thanks to Tony Moore for the 500 plus hours he's put in since T-Hill.
Gary Hickman FB #76
Edge Engineering