Ralt RT41/ Cosworth #27

[bill gillespie]

With respect to Rennie, Paul, Jason, etc., I believe this is the fastest/most developed FA available. this has been a spare-no-expense project to build the ultimate FA. Now that it is finished, I lost my driver.

Too many details to list, but I will email all apecs/ spares/ pics to interested parties.

Car / Spares/ fresh alloy block short stroke Jennings Cosworth with Motec EFI, Barrel throttle, flowed gantry injectors, and cdi coil-on-plug......$69k.

Same as above with 2 fresh Cosworths...same spec........$89k.

Same as above, but with 2.0liter Jennings Cosworth BDG...built to new SCCA engine rules effective 10/01/09................................................ .......$79k

Latest Polestar/Algie cabon nose. splitter, f&r wings......Algie strengthened tub, Lynx/Cameron F&R ARB, rockers, Ohlins TT44 dampers, Carbon nose/ Anhedal front wing, $25k Motec ADL/ M800 ecu with custom chassis/engine harnesses...4-channel egt and lambda.......engine dyno mapping and chassis dyno mapping and track mapping by Motec........etc, etc, etc.

Regards,
Bill Gillespie
wgillespie@aol.com
770-328-8184


Well over $200k invested....selling for around 30 cents/ dollar.

[Rick Ross]

I am familiar with this car, and it is absolutely immaculate.....I would love to own it. It is hard to imagine a nicer RT-41. Anyone with an interest in these cars should contact Bill for more info.

[Rick Iverson]

Stunning!

[bill gillespie]

C'mon Rick...you deserve this ride with the 2 liter......take care of your new pay raise, lol !

Regards,
Bill

[Rick Ross]

Bill,

Would you take a nice DB4 as a trade-in?

[DB4 Tim]

Very nice car Bill

[Rick Brannon]

Bill your car is stunning and if I could let go of the funds at this point in time Mike Demski and I would be on an airplane to test this beauty. If it is still around when I can release the funds you will get a phone call!
Rick

[Chris Forrer]

Bill,
Hate to see that you're selling. But, whatever you do don't sell it to Rick Ross (unless you get his DB4 and he promises never to drive the 41)

[bill gillespie]

I think you would look great in yellow !

Regards,
Bill

[Rick Ross]

Chris,

Bill's car would be the perfect addition to your collection. We need to keep this ride in the Southeast!

[DB4 Tim]

Hey...wait a minute it would be great in the South West ...Too

[HotRod]

Hey Bill, Nice car and good luck with the sale. I would love to own this. BTW, don't let lack of a driver make sell this. I'll provide driving services absolutely free of charge. Anything Bill own's is fast and done right! It's funny, I just happened to look at this thread and saw that you and Rick Ross are both posting here. I still own Rick's old Formula Mazda.


Take Care, Mike Immel

[bill gillespie]

Mike!

Small world......welcome online! ....pleasant surprise.

Regards,
Bill

[Chris Forrer]

Bill,

Yellow....hmmm. Wouldn't have a problem with that knowing it's fast. In saying that Rick would still whip me like a bad puppy in his DB4. I couldn't bear the shame. Do like Mr. Immel's thought of a 'ride' although that doesn't resolve your need to sell. Truly wish you the best of luck. I've been lucky enough to see and run with this beauty. Hopefully someone in the Southeast (or West) steps up and drives the stuffings out of it like it deserves.

[TASracer]

whats the original history or pro tacing history?

[bill gillespie]

The car came from a national racer in S. Cal.......pro raced by Cam Binder, but I don't have any pro results.....won division back in 2002.

I don't think any of that means a hill of beans, as the car has been completely revised, and even the steering wheel is different.

I will provide all details , ad nauseam, to anyone that might be interested. I still believe it to be the fastest, legal FA in the country based on Road Atlanta tests. Here's your runoffs winner......shame I suck as a replacement Driver.

Regards,
Bill

[TASracer]

thought it was my old rt 41 which was yellow originaly we campaigned in 97 with mike shank racing

i raced against cam binder


is it c2 eligible?

id like to do mid ohio pro race

[bill gillespie]

I emailed Ben about the Rt41 for C2, but received no answer. I've been told the Swift folks wouldn't want a Ralt in with their cars.

Call Vikki, you may get a better answer based on car count......have we met?

Regards,
Bill

[Rick Iverson]

......take care of your new pay raise, lol!

Bill;

Although the military keeps us on wiener water soup, money is not the issue. I have but one ride in my FC, and it is about four light years out of my league. Now your car, that's what dreams are made of.

Iverson

[bill gillespie]

The probblem with FA's is that if you ever really get hooked, nothing else gets it for you....kinda' like being a meth head i guess.

Too bad I'm not as fast as I used to think I was.

BTW, thanks for your service.....what do they have you doing now?

Best regards,
Bill

[bill gillespie]

Sale also includes complete Sequential shift conversion with cable and billet shift lever, plus original H-pattern assembly. Blueprint by WRD.

TRE/Quaife diff, Carbon clutch, Ti flywheel, and TRE annular release bearing assembly.

[bill gillespie]

Sequential conversion assembly SOLD...

Thanks for looking
Bill

[bill gillespie]

Guys,

The Ralt is also available as a roller, plus all spares for $50k. Install your toyota, or new engine of your choice. Package includes following partial list :

3 total sets wheels
25 gears
Front & rear ARB
Stock rockers
springs
$25k motec ADL, harness, sensors
4-channel egt amplifier
Ohlins Tt44's
3carbon noses
Algie carbon fr wing assembly
Carbon anhedral fr wing assembly
2 complete latest rear wing assemblies
All carbon bodywork
2 custom ram-air horns
complete nickel plated suspension
TRE blueprinted SMT 86/10 with Quaife diff
Algie stiffened tub....thicker floor
255mm and 270mm momo steering wheels
carbon chin splitter
carbon windscreen
Ralt bellhousing
TRE clutch annular release bearing
2 axles
carbon front and rear brake ducts
4 ap brake hats
new lift and hi-pressure fuel pumps
etc.......

Thanks for looking,
Bill

[bill gillespie]

Good morning guys,

10 % commission paid to anyone who brokers the sale of my car.....roller, or complete. Price adjustment to individual buyer.

Giving it away....to a good home,
Bill

[carnut169]

I've also seen this car and can say she is an absolute beauty.

[bill gillespie]

bump

[bill gillespie]

Price reduction to $40k for roller and all spares as previously listed. 2.0 Cosworth BDG, or 1.6 Cosworth BDD available , installed, 100% race ready.

Regards,
Bill

[quartzracer]

WOW! What a DEAL! A $10,000.00 dollar price drop.....unheard of.

Eric

[bill gillespie]

Guys,

I need to clarify my previous offer of 10% commission to anyone who brokered my Ralt, or purchased it outright.

That offer was based on a roller price of $50k, which would net me $45k and the broker $5k. I recently lowered the roller/ spares package for $40k and can no longer offer 10% commission based on the very low asking price.

I will offer ANY amount over $40k to anyone who brokers the car......sell it for $50k and keep $10k. Fair enough? Sorry for not posting this when I lowered the price.

Regards,
Bill
770-328-8184

[bill gillespie]

Sold....thanks ApexSpeed

[JByers]

Bill,
Where did it go off to?

Jason

[bill gillespie]

Hi Jason,

It went Northeast.......I don't think you will ever see it in an SCCA race......pity.

Regards,
Bill

[Chris Forrer]

Bill,
If not SCCA then Vintage? Doesn't seem likely. Aside from that are we ever going to see you on track again?

[DB4 Tim]

Congrats Bill.....I do hope to see it one day.