Suzuki GSXR1000 CAD model

[Lee Stohr]

CAD model available in .stp (4M) or Solidworks 2004 (13M) or .3dm (7M).
Many shapes simplified but the widths, height, trumpets, exhaust ports, rear engine mounts are pretty accurate. 2007 side engine mounts probably off by .050"
Would appreciate trades for other CAD models, what have you?
If you improve the model - please let us have your changes.
Otherwise it's free, or when I get around to responding.

leestohr@teleport.com

[HastyHorn]

Thanks for doing the work and providing it free.

Hasty Horn

[924RACR]

Sent you an email, would like to get a copy of the files... unfortunately the only significant piece that I have that be worth modeling happens do be a diff out of one of your old cars, so probably not of much interest!

[Rennie Clayton]

Old thread, I know, but... does anybody have a copy of this engine CAD file? Tried to reach Lee via email, but no response.


Cheers,
Rennie

[Jnovak]

check your email

Thanks ... Jay Novak

[Rennie Clayton]

Thanks Jay!


Cheers,
Rennie

[cerojo]

Could you please pass me the model .stp file. Thank you. Claud.

[GBugg]

Anyone (Jay ) have a GSXR 600 model?

[Ananth K]

Anyone (Jay ) have a GSXR 600 model?

This is the one I'm using in my F600 model on a temporary basis - be ready to throw it the hell out if it turns out to be inaccurate:

http://www.wwufsae.com/Shared_FSAE_C...Models/Suzuki/

[jcolley]

Digging up an old post, but if anyone still has this, please let me know. My first attempts with SolidWorks 2010...

[Lee Stohr]

click on my email above and I will send it to you.

[quick77]

sorry to intrude in this GSXR1000 thread, but would anyone have a 2008+ GSXR1300 engine cad/solidworks model? I had found one a few years back but it was fairly inacurate in the positioning of many crucial mounting points, which makes it not very useful!

Someone might have a more accurate one by now.

Thanks

[Thomas Copeland]

Sent you an email Lee. If I can get the file I'll work on it in Pro-E and see if I can improve it. Once I do that I can give it back to anyone that wants it.

So if anyone has the file can you send it to me?

[benkolodner]

Sent you an email Lee. If I can get the file I'll work on it in Pro-E and see if I can improve it. Once I do that I can give it back to anyone that wants it.

So if anyone has the file can you send it to me?

Sorry for the bump.

Does anyone have this model who could email it to me? Please PM

Thomas Copeland-- you had any chance to update the model?

Thanks,
Ben

[Mike Devins]

send me a PM with your Email, also let me know the largest file you can receive.

[dedge]

Hello everybody,

I know this thread is a bit old now, but can somebody send an accurate engine cad model (iges if possible?)
I am starting the design of a car (basically a Formula 1000) and I cannot fin any accurate date for the engine. I would like to define the rear framing of the car and the suspension fittings, but I cannot specify the lateral position of the engine, and the center line of the differential.
Here is my adress : dedge.design@gmail.com

Thanks a lot!

[Richard Dziak]

Posted to wrong thread

[john walmasley]

CAD model available in .stp (4M) or Solidworks 2004 (13M) or .3dm (7M).
Many shapes simplified but the widths, height, trumpets, exhaust ports, rear engine mounts are pretty accurate. 2007 side engine mounts probably off by .050"
Would appreciate trades for other CAD models, what have you?
If you improve the model - please let us have your changes.
Otherwise it's free, or when I get around to responding.

leestohr@teleport.com

Hi Lee, would you please send me this solidworks file for the 07 onwards gsxr1000, many many thanks it will help me hugely.
Regards John. ryanracing96@gmail.com

[DWickman]

Hi Lee, would you please send me this solidworks file for the 07 onwards gsxr1000, many many thanks it will help me hugely.
Regards John. ryanracing96@gmail.com

John, contact RPE. I got a CAD model from them.

Here is the link: http://www.radicalperformanceengines.com/

Desmond

[JoeFin]

I have Lee Stohr's Cad Model off of Grab-Cad but it came in 1/14 scale. Can't seem to find a means to "Re-scale" an entire assembly in solidworks

am I missing some thing ?

[JJLudemann]

I have Lee Stohr's Cad Model off of Grab-Cad but it came in 1/14 scale. Can't seem to find a means to "Re-scale" an entire assembly in solidworks

am I missing some thing ?

I got the model directly from Lee, and everything imported correctly. There must be a problem with the GrabCad model. Solidworks has a scale function, but it may only work on parts.

-Jim

[AdamR.]

hello, please send me model of gsxr1000

adam
@
adamrgarage.com

[DWickman]

Go to this link. You will be able to download a cad model of the GSXR 1000 engine.

http://www.radicalperformanceengines.com/4-cylinder/


Desmond

[Rick Kean]

https://www.dropbox.com/s/al9ue4aqqz...00.sldasm?dl=0

[scotech1au]

Me too please.

Regards
Chris
AUS F1000