KBS MkV F600/F5 Project Car

[ny_racer_xxx]

[SIZE=2]This is a car I was going to convert into a F600 car. I repaired the chassis and removed the rear sub. You can see in the photo I fabbed the lower rear sub, but it needs to be welded to the chassis. I bought many new parts for the car, some of which are in the photos. There's a new rack, bodywork, front/rear hubs, brakes rotors, rear axle, brake and sprocket hubs, front lower controll arms. Good straight wheels, upgraded front billet uprights, good fuel cell. I have basically everything to complete the car as a F600 including an 05 CBR600rr. Or you could finish the car as a F500.
Excellent winter project!!!

Chris Reinhardt
914-400-8022

[/SIZE][SIZE=2]http://i238.photobucket.com/albums/ff162/ny_racer_xxx/DSC00468.jpg[/SIZE][SIZE=2]
[/SIZE][SIZE=2]http://i238.photobucket.com/albums/ff162/ny_racer_xxx/DSC00464.jpg[/SIZE][SIZE=2]
[/SIZE][SIZE=2]http://i238.photobucket.com/albums/ff162/ny_racer_xxx/DSC00472.jpg[/SIZE][SIZE=2]
[/SIZE][SIZE=2]http://i238.photobucket.com/albums/ff162/ny_racer_xxx/DSC00474.jpg[/SIZE][SIZE=2]
[/SIZE][SIZE=2]http://i238.photobucket.com/albums/ff162/ny_racer_xxx/DSC00482.jpg[/SIZE][SIZE=2]
[/SIZE][SIZE=2]http://i238.photobucket.com/albums/ff162/ny_racer_xxx/DSC00487.jpg[/SIZE]

Last edited by Chris Reinhardt on Wed Nov 26, 2008 10:44 pm, edited 1 time in total

[mike w]

Is the car still available?

[ny_racer_xxx]

Car is still available...

[mike w]

What is the tubing diameter and thickess?

[ny_racer_xxx]

Mike, roll bar is SCCA road race legal minimum 1 3/8"

CR