Hi All
Getting set to go testing or FB next week and encountered a problem with our AIM Mychron XG Log reading the gear position potentiometer.
The problem we're having is neutral and 6th gear are giving the same relative value. This causes the Neutral position and 6th gear position on the dash to read a 0 as if it's in neutral when in 6th gear.
Talked with the techs at AIM and they're puzzled. They had me go into the diagnostics and read the Mvolts coming out of the gear position potentiometer and it reads the same for neutral and 6th.
Anyone able to shed some light on this problem?? I really don't want to do the calculated gear position which involves an algorithym using wheel speed and engine
rpm.
FYI- this is a GSXR1000 motor
HELP
Gary Hickman