RF 93-97 stuff

[Lincspeed]

As I am converting my RF95 to a DSR, I have some stuff to sell off. The engine and trans are already gone. I believe most of this stuff will fit 93 thru 97 cars.

Exhaust system (4>1 collector merge to tail pipe with megaphone end)- came off car.SOLD

3 sets of headers, steel. good cond.

1 merge collector, steel. good cond. SOLD

i muffler 9X4 to fit on end of megaphone TP. like new.

Roll hoop air inlet box, 2 piece with filter. good cond

Wings and things:

1 Gyrodynamics diffuser. good cond SOLD (I think)

-one complete rear assembly, incl mount braces dual element wing, alum end plates with wickers, very good cond. SOLD

1 10" cord X36.5 wing. fair cond. SOLD

1 3.5" cord second element cord wing, very good cond. SOLD (I think)

1 set end plates, honeycomb. one with slight damage at bottom, otherwise good cond.SOLD

Front:
1 full front assy. 10" cord main element with winglets and large end plates includes nose box. gc SOLD

1 set end plates 10" tall black, gc

1 set 10" cord 16" wide wings. gc SOLD

1 set 8.5" cord 12" wide wings. gc SOLD

various smaller endplates.

Bodywork: one nose, side boxes and possibly engine cover with snorkle intake - fair cond.


If interested I can post photos and work out a price for any of this stuff.

Clark

[TODD BISHOP]

Can you send me a picture of the rear wing assy? Also how much are you asking? Thanks Todd tbishop44@cox-internet.com

[ghoneycutt]

Clark,
email sent on rear wing stuff
Greg

[RussMcB]

Neat stuff.

I'm interested in having a spare fiberglass nose, especially if it is a one-piece. Can I see a picture and get a price?

I'm also interested to see a roll hoop air inlet box. I've heard of them for these cars, but never seen one. I'm wondering if I could use it when I build a new air box for my bike motor.

Thanks, Clark.

[RacerDave51]

Clark I emailed you this morning about some stuff. I'd like to see some photos of the wings if possible & to talk about price.

Thanks

Dave

[Lincspeed]

Thanks for all the replies/e-mails. I will get some pictures tomorrow and figure out some prices and get back to each of you. There are three or four guys interested in the rear wing assy! Yikes!

Clark

[Lincspeed]

As I am converting my RF95 to a DSR, I have some stuff to sell off. The engine and trans are already gone. I believe most of this stuff will fit 93 thru 97 cars.

Exhaust system (4>1 collector merge to tail pipe with megaphone end)- came off car.

3 sets of headers, steel. good cond.


i muffler 9X4 to fit on end of megaphone TP. like new.

Wings and things:





Front:

1 set end plates 10" tall black, gc


various smaller endplates.

Bodywork: one nose, side boxes and possibly engine cover with snorkle intake - fair cond.


If interested I can post photos and work out a price for any of this stuff.

Clark

[cooleyjb]

Follow up PM sent.

[RussMcB]

I'd like to update my wish list.

Please add the following:

1 set end plates, honeycomb. one with slight damage at bottom, otherwise good cond.

I'm still interested in the fiberglass nose.

You can remove my dibs for:

Roll hoop air inlet box, 2 piece with filter. good cond

I'd love to have the rear wing, but I'm probably 12th in line, huh? :-).

[TODD BISHOP]

Clark, I'll take the rear wing assy! Let me know how you would like to handle everything. Thanks Todd Bishop

[Lincspeed]

The rear wing assembly is tentatively sold, pending receipt of check. This sale was based on the date/time stamp of the request to buy from the 6 different messages I received or saw on the site. Joe Cooley had the first one in (Jan 2 11:56am) and agreed to the price once I posted it. Sorry Todd - actually there was one other guy in ahead of you. I didn't know how else to handle this and apologize to those of you who may be dissapointed/pissed off.

On the other items listed and photoed, I will await offers from those interested, and will sell to the first highest bidder.


I will post more photos next posting.

Russ - e-mail me at lincspeed(at)hotmail. com

Thanks, Clark

[Lincspeed]

Rear upper small element wing, very good condition $100 SOLD

Speedway small front winglets, good condition, $50/set or $75 both sets. SOLD

Rear wing support brackets, very good cond. $30

Front wing end plates, 10" tall, good cond. $30

[Iwrenchforfood]

Clark,

I am interested in the front wing and nosebox if its fits a '96 monoshock. Looks like it will.

thanks

James
work 360-384-8562

[TODD BISHOP]

Clark, Sorry for the confusion, I figured I was the first to request info from your posting, and figured I would have the first chance to buy. Todd

[Lincspeed]

Todd - you were the first to respond on the forum (at 1:40 PM ) but Joe Cooley sent me a PM at 11:56 AM and Bob Coury sent one at 1:27 PM... and so on with several more following those in either PM's or personal e-mails to me. All VERY confusing for me to sort out - I was up till 1AM last night (way too late for an old fart like me!) trying to figure out who had "first dibs" on what based on three different sources! I guess these wings are in pretty high demand if you can beat Avrill's $1500 cost for a new set.
Anyway, I really hate to stir up all this frustration with everyone - I had no idea what a can of worms I was opening!

Next time I open a thread on stuff to sell, I think I will specify that inquiries will only be considered if posted on the forum. This "PM" system is really nuts! IMHO

Sorry for the rant.

Clark

[Lincspeed]

Clark,

I am interested in the front wing and nosebox if its fits a '96 monoshock. Looks like it will.

thanks

James
work 360-384-8562

James - I don't know if it will or not. Maybe someone could chine in and say yes or no. There are a couple of guys ahead of you for these, but I have not heard anything firm back form them yet...

Clark

[rickjohnson356]

Hi:

I am interested in the diffuser, if not already taken.

As per your request, I am posting my request here rather than pm'ing (actually, I am going to pm right now too)

You stated your preference for posting here, but indicated that you made the sale decision by the PM/EM timestamps. That is confusing to me at this point, so I will cover my bases.

PLease let me know the price for the unit and whether it can be shipped via UPS ground to 30144 zip code.

TIA,
Rick Johnson cell 404-310-4329

[TODD BISHOP]

Clark, Please don't sweat this ordeal, Im not mad or anything, I can understand with the time zone it would be quite confusing. I show you posted at 12:23 PM, so I couldn't understand how somebody cound e-mail you before you even posted your ad!
I do agree, the transactions should be straight up and done on the forum only. Thanks again Todd

[RacerDave51]

Todd is right--no sweat. To me, the offers should be made on the form only. I sent Clark a private email at 12:50 Jan 2 (27 minutes after the original offering post) but it might not have been read until later. To make it easier on the seller and keep confusion down I guess the PM or forum post seems best. I've learned my lesson.

DaveK

[Greg Mercurio]

Are the winglets still available? If so I'll take both sets.

[ghoneycutt]

Clark,

To duplicate today's email I sent you,

Clark,

I'll take the 10" lower rear wing, fair cond. $80
Please provide a total with shipping and I will mail a check or use paypal, whichever you prefer.
Thank You
Greg

[Derrick Park]

Clark,

I am checking to see what might be left after all the sales the last few days. I am interested in the diffuser, front wings, winglets and endplates, rear wing endplates, fiberglass nose (both parts) and any other body work. Any pictures not already provided on these parts will also be helpful.

Thanks,
Derrick
dspark13@aol.com

[Lincspeed]

Gyro dynamics diffuser Very good cond. $300 SOLD

Nose fiberglass, good cond. $80

Several guys have already voiced interest in these parts - I need to know back from them if the price is acceptable, and the guy who had the earliest initial inquiry will "win".

Deadline for responses will be Tuesday 6PM EST

Thanks, Clark

[RussMcB]

Nose fiberglass, good cond. $80

Several guys have already voiced interest in these parts - I need to know back from them if the price is acceptable, and the guy who had the earliest initial inquiry will "win".

Clark, I may have been near the front of the line for the nose. I'll pass on it, though, since my current nose is the longer one piece type.

[Peter Horvath]

I've kind of lost track here, but I'll take the rear upper small element wing, very good condition $100, if it's available. Call me at 330-420-0019 or PM, and I'll send you a check.

[Derrick Park]

Clark,

I am interested in the diffuser if the first guy who inquired about it does not take it. I am also interested in the lower nose if not already taken. Any nose poles or nose boxes left, regular size front wings or winglets.

Thanks,
Derrick
dspark13@aol.com
281-684-3141

[kea]

96 Van-D nose box is different, than the 94-95 or the early 93 type.
Averill Racing Stuff,Inc.

[Iwrenchforfood]

Keith,

Thanks for helping out with the nose box compatibility issue. It seems the RF96 is an orphan for lots of parts as I see 93-95 and 97-99 parts options but none for 96.

Clark,

Thanks for the emails and help. I will pass on the front wing /nosebox assembly as I have no way to carry out modifications. I need bolt-up parts for spares.

Good luck

James

[Derrick Park]

Clark,

I noticed that James passed on the front wing / nosebox assembly. I am interested if there is not someone already in line for it. If you could post pictures or e-mail them to me and the price you are asking, I will be appreciative.

Thanks,
Derrick
dspark13@aol.com

[kea]

James,
If/when you need a spare, we build those wings (better design) and boxes for the 96-98 Van Dieman (and earlier models) in our shop.
Keith
www.racing-stuff.com

[norton69]

Clark,

How much for the steel merge collector?

Melissa's Dad

[Lincspeed]

Jim - I think it's sold along with another part - but maybe not. There is aonther one on the complete header and tailpipe set up - make me an offer?

Clark, Melissa blocker

[ghoneycutt]

Clark,
please email or PM or call me 301-697-6541 me so we can complete the transaction on the parts we are discussing
Thanks,
Greg

[norton69]

Clarke,

Sent you a PM.

Melissa's Dad

[racer27]

Clark -

Please Email me at abuldo at Westcon.com (CC abuldo at aol.com) so I can send payment for the Air sccop we discussed.

I also sent you an email the other day ... having my shipping addy.

[JHandley]

Clark,
I tried to respond to your pm but ur inbox was full.
Let me know about the small winglets,
Thanx, Jeff

[DormaWerks]

Clark,

I am interested in the nose and wings which you may not have sold yet. I have seen the picture of the nose and it looks compatible with my 94.

Please let me know if it is still available.

Bill Dormandy

[Lincspeed]

The nose box/wing assy. is sold - at least the "check is in the mail"
And so are the small winglets...
Clark