Reynard 90H for sale

[Chris Robson]

REYNARD 90H FORMULA ATLANTIC

Reynard 90H, complete roller. (needs assembly) SCCA Club and PRO log books and chassis tags
Full Carbon Fiber Monocoque, Mag Gearbox

Note: Aluminum Floor was replaced (by Algie Composites) with a 5/8" thick carbon /aluminum honeycomb/carbon. Extremely stiff chassis

Koni Aluminum Shocks 3012 shocks (2 way adjustable), springs
All mechanical components (suspension, trans, brakes, etc.) LESS than 500 Miles of use.
New Ring and Pinion (plus new spare, see below).
Dummy Engine Bracket

Spares (not needed to complete the car) Include:
Original Set of Wheels w/ mounted rains
One F-3 Carbon Fiber Rear Wing Assembly
One F-3 Carbon Fiber Rear Wing Lower Element and Mounting Plates
One Front LH Upright Assembly NEW
3- Rear LH / RH Upper Control Arms NEW
2- Rear LH Lower Control Arms NEW
Various sets of Front and Rear Tie Rods NEW
Various sets of Front and Rear Push Rods NEW
2- Rear Hubs with Spindle Shafts NEW
2- Spindle Shafts NEW
2- Pedals Mounting Brackets
5- Brake Hats NEW
4- Disk Rotors NEW
2- Front AP Calipers LH/RH NEW
2- Rear AP Calipers LH/RH NEW
Upright Rear Bearings, Seals etc. NEW
One Side Cover Transmission (Magnesium Cast) NEW
One Side Cover Transmission (Aluminum Billet) NEW
One 8/31 Ring and Pinion NEW
One Nose Cone
2- Nose – Crash Boxes NEW
2- Roll Bar with Mounting Plates (one-for tall drivers) NEW
One Front Plate Engine Mounting
Various Brake Cooling Scoops
Various Front Engine Mounting Brackets Top and Button
Various Front and Rear Suspension Mounting Brackets
Various Rates, Rear Stabilizing Bars with Mounting Blocks
Various Front and Rear Wing Element

Photo's upon request.

Market determines price, Best Offer

Chris Robson
(860) 429-2334 H

swiftdb2@aol.com

[Chris Robson]

SOLD!

Thanks Apexspeed!

[avika]

If available please call to discuss details.
Avik Avedisian
(818)262-7357

REYNARD 90H FORMULA ATLANTIC

Reynard 90H, complete roller. (needs assembly) SCCA Club and PRO log books and chassis tags
Full Carbon Fiber Monocoque, Mag Gearbox

Note: Aluminum Floor was replaced (by Algie Composites) with a 5/8" thick carbon /aluminum honeycomb/carbon. Extremely stiff chassis

Koni Aluminum Shocks 3012 shocks (2 way adjustable), springs
All mechanical components (suspension, trans, brakes, etc.) LESS than 500 Miles of use.
New Ring and Pinion (plus new spare, see below).
Dummy Engine Bracket

Spares (not needed to complete the car) Include:
Original Set of Wheels w/ mounted rains
One F-3 Carbon Fiber Rear Wing Assembly
One F-3 Carbon Fiber Rear Wing Lower Element and Mounting Plates
One Front LH Upright Assembly NEW
3- Rear LH / RH Upper Control Arms NEW
2- Rear LH Lower Control Arms NEW
Various sets of Front and Rear Tie Rods NEW
Various sets of Front and Rear Push Rods NEW
2- Rear Hubs with Spindle Shafts NEW
2- Spindle Shafts NEW
2- Pedals Mounting Brackets
5- Brake Hats NEW
4- Disk Rotors NEW
2- Front AP Calipers LH/RH NEW
2- Rear AP Calipers LH/RH NEW
Upright Rear Bearings, Seals etc. NEW
One Side Cover Transmission (Magnesium Cast) NEW
One Side Cover Transmission (Aluminum Billet) NEW
One 8/31 Ring and Pinion NEW
One Nose Cone
2- Nose – Crash Boxes NEW
2- Roll Bar with Mounting Plates (one-for tall drivers) NEW
One Front Plate Engine Mounting
Various Brake Cooling Scoops
Various Front Engine Mounting Brackets Top and Button
Various Front and Rear Suspension Mounting Brackets
Various Rates, Rear Stabilizing Bars with Mounting Blocks
Various Front and Rear Wing Element

Photo's upon request.

Market determines price, Best Offer

Chris Robson
(860) 429-2334 H

swiftdb2@aol.com

[BeerBudgetRacing]

If available please call to discuss details.
Avik Avedisian
(818)262-7357

Look at the date of the SOLD post. 15+ years ago.

It's probably changed hands since then.