Search:

There is no side door... ...but there is a front door closed with a laughable little built-in deadbolt.

Only it's a very small door.

:)

That's a little bit similar to my trailer.

The rear door is "locked" from the inside with a couple of 4" long 1/4" bolts that just drop through tabs on the door and into the frame of the trailer....

We're fortunate here in BC, because Chevron still carries 94 octane. So there's been an informal agreement among the FF group that we'll all run that.

In 2015, before the spec tire rule, the SCCA Runoffs were won by a car running Avon front tires on all 4 corners , so at least then, there was a tire they made that was sticky enough to compete with...

So so much about the paint job, but...

...is that a Medina short wheel base kit I see on the rear suspension?

Ask me how I found out my electric fire bottle switch was too close to my shifter... :eek:

It most definitely IS an annular cylinder.

Mine too. On the front shock mounts on the oil tank, the posts are the same diameter as the spherical bearings hole, and there is only a very small bushing (about 3/64" in thickness both axially and...

Two are DEFINITELY needed.

When I first got my RF98, one of the corners (left rear) had a single shoulder bushing on the bottom and just a stack of washers to take up the space between the shock's...

A small amount, yes.

Not only are they Bilsteins, but I had a set that look almost exactly like that rebuilt by them 4 years ago.

Try:

Tim Godshall,
Technical Sales Motorsports

ThyssenKrupp Bilstein of America...

1. I doubt you quite a lot on that.

2. People do stupid things all the time.

:)

I just thought I'd give a slightly in different perspective to the FV scene in the PNW as I have spent the last 7 years in a workshop next door to a gentleman who ran a large FV rental operation and...

Your car has a Honda, and therefore, it has a high pressure electric fuel pump.

If you have a fuel sampling port, just use the port and the pump to pump the cell dry and then add the precise...

I won't post it in an open thread, but I spoke to Greg a few weeks ago, and I have the number he called me from. It is the same number that is listed on his Customer Service page, but if you can't...