Search:

I use a 24x8.5 V nose, when in FA mode with pit wheels no problems, when in P2 mode it JUST fits between the wheel wells, BUT
you really don't want to make the wrong decision up front as you race...

Picture in FA trim now

Hello
Check your PM

THANK YOU!!
I Wonder if they are the same as the ones used by AIM? they look the same and mine are VDO
so i guess they are but not sure and AIM wants you to upgrade to their new one which means...

HELLO ALL
I am looking to buy VDO spare Sensors for my AIM dash.
they are the old style 0-5 bar and 0-10 bar 2 post, Aim does not stock them anymore.
any ideas??? WANT TO BUY.

i bought mine from MIKE DEVINS HRP does a great job

I was the NORTHEAST DIVISION NATIONAL CHAMPION in both classes in my WEST and P2 NORTHEAST CONFERENCE CHAMPION in 2017 in my MYGALE


NOT RUNOFF NATIONAL CHAMPION ALTHOUGH WE TRIED...

HI Pat
Back in the day 2006 my NEW WEST came with the floor that the diffuser tunnels could not start in front of the wheels,
then SCCA let us add real tunnels and we had one made and ran in CSR...

HI Pat I have a rear diffuser i took off my WEST when we where able to go to tunnels, it goes from the roll bar back and with the rule change in P2 to go back to this design i think it is legal...

I still have a original stock floor from my WEST if anyone needs one, it goes from the roll bar back and was replaced
when we were allow tunnels.
speedmandave@outlook.com

Has anyone seen the engine rules for FB engines being built for FA in DETAIL???
I heard that we are allow to increase compression to 14.5 to 1 but then that is all I have seen.
Can you use a P2...

Hello Pat
Try Mike Devins at HRP racing products in Michigan he made me 2
sets for my WEST AND MYGALE 586-623-3055

I talked to GREG IN NOVEMBER here is the information he gave me

Perspective Glass Company inc
750 SW 14th Ave
Pompano Beach FL 33069
954-773-9714
ATT GREG MOON

GREG HAS ALWAYS BEEN HELPFUL...

At this point I really do not want to see the cars to be a regional class only, I have seen SCCA do that in the pass
and that really kills the value of our cars that we ALL have to much money in!!!...

Hello Thomas

I sent my request letter in OCT 2020 and was told that my answer would be in
DEC 2020 Sportscar, found the answer from SCCA they said NO.

IMHO
The class was great and I feel that if we could have stayed together as a group then
it would still be a Major class today, but with the conflict with pushing for FB to have it's own race...

i have some 600 head gaskets for sale what year and what kind of engine?

I don't feel bashing SCCA will do us any good, I feel that running regionals and parking cars did not help either, but that is history and we can't change that either. I would like to go back to OW...

i would be open to something that is cost affected, but redesigning my car and spending
thousands of dollars to install a Aprilla, or V4 Duck, or Moto GP motor, just does not make sense
and is...

Missed the race, any idea if it will be rerun somewhere?

As far as i know under the current rules with a built 08 GSXR 1000 ENGINE
the best number i heard off the dyno is 209 HP and the cost to get there is around 12k to 15k
and no one knows how long it...

014 Mazda powered won the runoffs. then the 016 and the PFM struggled to
compete. Toyota powered dropped out, but in the long run if you ae a F1000
i think you will have a great time all season but...

Just wondering what the FB owners are thinking after watching the runoffs yesterday.
as a FB owner i don't think so. not sure where we should be but i don't think FA is correct
for us!!!!
Also i...

If we can use P1 and P2 enignes then are we allow to
do machine work on the heads?
port/polish/shave, because in those classes alot of the power
is in the machine work, and most of the pistons...

Maybe i am missing something but i would like more information
on the FB to FA engine, with the 14.5 CR rule you have to change parts
inside the motors, rods, pistons, and to be able to competitive...

Still little confused?
We can not get to 14.5 compression without changing pistons from stock, and rods from stock,
and not sure how that will help without doing some head and cam work, so now we...

With FB going to FA in SCCA has anyone heard of what we are allow
to do to a GSXR 1000??
I just got the 2020 GCR and all it states is refer to December 2019 bulletin
that just tells you how to...

[QUOTE=JEREMY HILL;590174]Russ,

We have a great place to race with the FRP series in the northeast but it would be good to have the option to run Majors and the Run-Offs.

Jeremy[/QUOTE
I...

Any one see the results from MID-OHIO pro race??

Denny Sederi in ohio has 2 GRIFFINS
He stills runs out of Jimmy shop PRO STAR

What is the HP and weight of these cars vs a true FA
what is the FA HP and weight today?

If scca opens the engine rules for FB going into FA in 2020 it might
help FA with better numbers also, you have older Pro Mazda's in FA now
and if FB comes in it should build up FA numbers. Because...

Wondering how the engine could be legal in FB or F1000
when it should have been Dynoed and approved by SCCA?

I do feel that if FB becomes part of FA in 2020 that this motor
is closer to the HP...

I would be interested also in switching to BMW from Suzuki, if you can email me some information on year, model, HP, torque
and pricing of a package with ECU doleary@rohrich.com

i understand that the Gen 3 tire for the Glen was tested by Alex
and was to ho very well, he was faster on it then the Hoosier during testing
at Summit this pass week.
we will see what happens at...

Well we are now waiting for the GEN 3 tire for the Glen, so far not sold
on the tires.
Hill showed up on Hoosiers and was 5-6 seconds faster then the Gen 2 tire

Hello
So at the runoffs FB's at tech on Monday was questioned about " do you have a restrictor in the engine" well NOBODY had restrictors so the end result was they felt that the rules were not...

HI COOP

Our main concern is engine temp, we can not get this car under 220-230.
so I understand that a stock pump puts out under 200 gal per hr. so we are looking
for something that will...

HI GUYS
Looking to install a ELECTRIC WATER PUMP, does anyone have any idea on
what one is best and where to buy one (GSXR 1000) engine.
dave

HI GUYS
Anyone willing to share gearing for MID-OHIO???

HI GUYS
I am in need of a place to make THROTTLE CABLES for my
GSXR 1000
any ideas ???????
thanks
dave

Hi Bob
Thanks
I have tested the car but have not raced it yet, we are leaving today for Summit
Point and then if everything goes well we will be trying to race it enough to get to the runoffs...

Hi Coop
we are not going until April, hopefully will not need snow tires.:confused:
Did you ever run your FB there? if so can you help me out on the gearing??
dave

HI GUYS

We are heading to Summit Point for our first race in the Mygale FB car we built
any ideas on GEARING for Summit
thanks
dave

Does any one know where to even buy the plates? And what was the final decision
on what engine uses what plates.

Hi Gary
The temp is taken from inside the oil pan itself, that is where I have always taken it?

Hello Guys
last night was our first test since we built the car, we tested at PIR and put around 50 laps on the car it ran GREAT, one concern we had was oil temp, seems high compare to what I had...

hi guys
any ideas in what the OZ wheels weight is 6" and 8"
I have 2 sets of the 3 piece youngblods now
can we save a lot by going to OZ?
dave

HI GUYS
CAN WE TALK WEIGHT?????
So the conversion is done and we are going to start testing in a couple of weekends, BUT
the car is FAT!!! so the question is this,
for the guys who have...

You did a great job on your rebuild of this car I looked at all the pictures, the Mygale
looks like a very strong chassis and we thought it would make a GREAT F1000, FB.
everything on the car...