Search:

I have a lightweight aluminum flywheel, and when I split the car, found the friction surface out of flat.
There did not seem to be a "traditional" steel insert, and instead what seemed to be a...

Has anyone tried using the trans logic shifter on their motorcycle powered car? I am not sure if it’s going to be as good as the flat shifter that everyone seems to use.

Best, Guil

Although my car has a very good 12a Drummond that was rebuilt by Lee Follansbee, my recent
acquisition of a more modern JFR box has made me consider going to the biggest 4 stroke
motor I am...

Can someone give me a rundown of the 2.5 MZR motor that is used in the P1/P2 category.
How much of the original motor is actually used in its race form?

Best,
Guil

https://www.apexspeed.com/forums/attachment.php?attachmentid=102588&stc=1https://www.apexspeed.com/forums/attachment.php?attachmentid=102589&stc=1https://www.apexspeed.com/forums/attachment.php?attach...

I am servicing the shocks on my car, and not able to
cross reference any in web search. I believe they are
Bilstein, although searches on their site come up empty,
These are gas pressure mono...

Does anyone know what the drawbolt actually does?? I have heard of people
running without this.

Also, I am rebuilding side plates and finding them not wanting to come apart.
I am applying heat,...

My car is actually one of the better early atlantic to CSR conversions, and will run within the 115% now,
and will only get better as I refine/develop the car and my driving. We are all in the same...

I have a Beasley that was run in CSR for years, and now I would like to enter it as
a P1. The question for me is why do the rules apparently not permit this because
the car has 12a power? The power...

Diameter of o.d. of splines is 1.373 about.

Hi All,

I have a 1st gear and want to confirm that it is an LG First.
The shaft has 10 splines.https://www.apexspeed.com/forums/attachment.php?attachmentid=100408&stc=1
The ratio is marked as...

After experiencing some issues with the distributor on my 12a
powered Beasley, I would like to convert to crankfire. I am considering
using an XDi2 for this, and have had good results with the...

I ended up sourcing some from Dave Bean. I had the entire set REM-ISF'ed by
Stonebridge as well.

Thanks everyone for your help.

Best,
Gui

I am wondering if anyone has +.020 diameter followers to suit
BDD, or if anyone knows of a source for such a thing. I need 3 of
these.

Guil

Hi All,

I have recently acquired a T-360(HU-02) project, and would
like to find a source for bodywork(nose). I have begun
reassembling the tub, and need to source new fuel
cells as well.....I...