Heh - yep. Figured that out. Spent a few hours tail chasing. But we learned some things, which is good...along with don't spend a lot of time on used-up hardware. ;)
This r/p was 2nd hand and...
Type: Posts; User: h00die
Heh - yep. Figured that out. Spent a few hours...
Heh - yep. Figured that out. Spent a few hours tail chasing. But we learned some things, which is good...along with don't spend a lot of time on used-up hardware. ;)
This r/p was 2nd hand and...
Yes, I know about the pitting - I've run worse on...
Yes, I know about the pitting - I've run worse on the 901s I used to use. While I wouldn't recommend it, there's still some life in this one....but no, I'm not attached to it at this point as this...
Lee - thanks a ton! THAT would make way more...
Lee - thanks a ton! THAT would make way more sense if it were to the back of the pinion head. Altho how that's helpful isn't really clear to me as that's a buggar of a dimension to try and get...
Help reading Hewland pinion markings
All - I'm working to set up the depth and backlash on our mk9 (8:31 matched r/p, with webster side covers), and I'm not sure how to read these pinion head markings as they're not consistent with...
Installing reverse in case that never had it fitted
I have the opposite challenge - I have a main case that has never had a spud/spigot installed. What case mods are needed to install one?
I understand you need to spot-face the mounting boss where...
Hewland Mk9 reverse “spud”
Rehabbing a Mk9, and the case was not fitted with reverse from new. I have a reverse spud but I don’t think it’s for this gearbox as the locating hole on the spud doesn’t seem to be in the...