I stock all Hewland ... nothing else . MK-LD-FT-DG-LG
You would be amazed at some of the junk I see in the boxes that come through my shop
And the destruction a substandard broken dog will do
Type: Posts; User: scotty82
I stock all Hewland ... nothing else . MK-LD-FT-DG-LG
You would be amazed at some of the junk I see in the boxes that come through my shop
And the destruction a substandard broken dog will do
The Formula Mazda is a Webster build that has the case in the standard VW configuration . Model 300
It has its own bearing carrier design along with the wing mount/ finger housing and rear cover. ...
Tilton Flow Control Valve
90-5000
I used to sell a lot of these to the drag race crowd . great for reducing shock loads
scotty
Thanks Guys . I really appreciate
the nice posts. Means a lot .
scotty
New cases are 4 bolt Rhino cases
Pinion bearing will be different from the ring nut style.
Front layshaft bearing will be a 35 mm retained with a grub screw /anti-rotation bolt through the side ...
You will take the MD . Subtract the Pinion head size , Than subtract you fixture radius of 2.355
The proper way to do back lash readings is off the 4/5 hub when all the hubs are stacked and tight...
Rick..
Same thing for the Idler gear screw,,, Heat,
Chances are the screw is retained with loctite. Heat will break that down and open the spigot ,
Rick,
You will need to heat that portion of the case to around 200 degrees F.
The case will then release the spigot .
Leave the idler on the spigot , Reach in with a welding glove and pull.
Or ...
First gear will now be fixed.
So second will need to be hubbed
You will need two new Layshaft spacers for the larger OD of the layshaft .
Possibly a new layshaft nut . MK5 will be a 7/8-20.
...
Dog boxes typically are a bit noisey . But if it sounds like a box rocks banging around there is a good chance there is a bent tooth somewhere in the mix . Each gear needs to be inspected .