The Austin Healey Sprite uses a T fitting on the brake line and a pressure switch available from Moss Motors https://mossmotors.com/542-110-switch-brake-lights-lucar-terminals-tapered-pipe-thread...
Type: Posts; User: APBos
The Austin Healey Sprite uses a T fitting on the brake line and a pressure switch available from Moss Motors https://mossmotors.com/542-110-switch-brake-lights-lucar-terminals-tapered-pipe-thread...
Update
center hole diameter = 2 in or 50 mm
peg drive 6 on 3.5 in (90 mm)
peg pin diameter 1/2 in or 12 mm
The backspace is 4.5 inches for both rims
https://www.apexspeed.com/forums/attachment.php?attachmentid=109818&stc=1
Since things seem to be quiet.
When I purchased the Zink z11 I got 4 3 piece 13 inch centerlock BBS rims. 2 -10 inch...
Does this thread give use some more clues as to how LeGrands did the axle shafts?
https://www.apexspeed.com/forums/showthread.php?62943-Help-Replacement-Axle
I measured the Honda CV joint to the Hewland 6 hole drive shaft. They do not line up. I need to see if the Honda shaft will accept a VW CV joint. May be that is why he had the blueprints of the...
John Allen
That add also gives me hope the axle width is correct. I contacted Scott Young today ( very helpful and knowledgeable), very nice guy and will send him a packet of information. My...
Guess which stub axle uses a 6305 Bearing?!!!!!!! https://www.ebay.com/p/15004104672 The Honda 600! Now to find out the axle width…
Will do!
So the Fastback Stub Axle definitely will not work. It is too wide at its base to fit in the inboard portion of the upright. I was hoping that I could just use another bearing or machine the upright,...
A few hours turned to a few days. This Saturday I managed to pick up a pair of Lola t210 etc uprights and brake calipers from and estate auction.
...
https://www.apexspeed.com/forums/attachment.php?attachmentid=109254&stc=1
The Outer diameter is 62 mm which fits these 4 bearings found in the parts bin. They are 62mm x 25mm x17 mm! We are getting...
The last date on the blueprint is 1981. The date on the upright is 1979. I hope you guys will for give my ignorance on the rear suspension, this is my first car with CV joints. Since the unfinished...
Correct. The car uses Elva mk7/8 suspension components and came with 4 and 6 lug rims. Norm had a mk3 Elva and it looks like he collected parts from a mk7/8 and used a LeGrand mk18 body and designed...
Found a picture of this in my collection of pictures of the bits that came with the chassis. VW rear axle hub?
https://www.apexspeed.com/forums/attachment.php?attachmentid=109248&stc=1
I did a quick search for a Hewland mk9 drive shaft an came upon a 12 hole shaft that matched what I was looking for. It would make sense it would be a 6 hole shafts....
Bingo!
I need to get the measurements for the mk9 Hewland 12 hole drive shafts, but it sure looks similar. Norm Hart was an engineer and maybe this was an exercise in being complete and he...
I am trying to source 2 outboard drive shafts for my project. Here is a dimensional drawing of the shaft
https://www.apexspeed.com/forums/attachment.php?attachmentid=109236&stc=1
5.5 inches Spicer...
Just got back from a conference and was pleasantly surprised by this post, Thank you. I’ll reach outtoyou after the jet lag wears off.
Paul
Excellent. Thank you!
Could someone guide me to sizing coilovers to a chassis? Since the body of my car is a LeGrand, but the chassis is at a minimum a modified LeGrand MK18/25 chassis I would like to learn how to...
https://www.apexspeed.com/forums/attachment.php?attachmentid=107742&stc=1A little more trivia about Norm Hart. In 1959 at Santa Barbra he wins his class in an Elva in a Novice Race. The overall...
I have an idea they are Elva MK VIi or similar. Need to measure the brake brackets to help refine the design. It should not surprise me as Norman Hart raced an Elva in the late 50’s.
Paul
I suspect I might have a few of these posts. Here is the first..
https://www.apexspeed.com/forums/attachment.php?attachmentid=107737&stc=1...
John is the Fiat motor available or an equivalent.? Quick search and I couldn’t find anything in the US. Not really familiar with 128 ( was it used in the Yugo?)
Regards
Paul
Kip
I was wondering what Datsun motor was used as I saw the results section the other day. I have a 210 transmission in my garage for my AH sprite. I think I even saw an adapter plate for...
Gary
It is my intention to the car in a period correct way. From what I have read LeGrand had the option of putting an inline engine or a motorcycle engine ( see the attached). The rear chassis...
Hello everyone,
A few weeks ago I purchased a chassis ( abandoned in the process of being built), body, plans and boxes of parts. The plan dates from 1979 to 1988 and most have his name (N.J....