Congratulation to Clint McMahan - starting 20th on the USF2000 grid and finished 7th in race 1 Nice job!:checkered:
Type: Posts; User: tedsimmons2
Congratulation to Clint McMahan - starting 20th on the USF2000 grid and finished 7th in race 1 Nice job!:checkered:
I can't answer the Df question, but I’ve never known Jack to knowingly run a illegal car.:kiss:
However, I want to point out that without denying or confirming my car has any illegal tricks I...
Jay, I was poking fun at this year’s Runoff’s tech inspections on Jack Walbran’s car. They disallowed his qualy times based on the bodywork being higher than the tire diameter.
SCCA National...
Quote – My previously installed 30mm restrictors were render useless by the idiot (me) who removed them to install the 31mm restrictors. I’ll have to order new ones from Dave.
I’m just...
Status Update?
As Cory pointed out the CRB is asking for input (comments for or against) on the proposal to codify the elimination of the use dry sump and external water pumps in F500.
I will be...
133.8 mph July 12, 2015 at the F600 Challenge race.
May get a chance to run the July 4th race at Mid Ohio and have never been to the track. Would appreciate a link to some in car video. Preferably in a F600 or F500. Other links may be useful as well....
Never took it as an insult or personal attack, what you wrote was true!:kiss: And you better have the new nose ready for me at VIR.:D
This statement needs some clarification – but first a message to Leon (Mitchell Racing Services). “The bump you feel as you put the bus in reverse gear is me still under the bus”! :D Seriously,...
9.1.1. Formula 500 (F500) Specifications
A. Carburetors: The induction system is restricted to two (2) 38mm
Mikuni VM 38 round slide carburetors (except AMW). No modifications
are permitted to the...
2015 GCR 9.1.1. Formula 500 (F500) Specifications
Section 14 Snowmobile Derived Engines
No component of approved engines may be altered, modified, or changed, nor be of any other than original...
Just keeping the conversation alive not trying to be combative or argumentative:
If the SCCA makes it so the 2 cycle has a bit of an advantage then the class will not grow and the Concorde...
Below are pictures of the throttle cable attaching bracket on a 2007 GSXR 600. Purchased from:
Piontek Engineering Inc.
125 W. Auburn Trail
Brighton, MI 48114-5000
810...
While reading the new 2015 GCR for the F500 class “spec line items” I can’t find Note #5. Does anyone know where I might find it?
http://www.scca.com/assets/2015%20GCR-January.pdf
GSXR600...
Scrubble - Stainless Steel for long lasting muffler repack. Scrubble is a coarse stainless steel wool product that is an excellent muffler packing material. It appears more like mill-shavings than...
Everything was going OK at the ARRC until Friday (Halloween) when these two showed up looking for their lost spotted dog. One of them stayed and raced while the other one started working on the race...
Arrived on Wednesday evening and setup looking forward to getting some practice time on the track. Thursday went out for the first session and saw some slight smoke out the rear. Found the water pump...
I used 3.0 gallons at the October 5th Summit Point race that consisted of 16 race laps, one out lap, and one cool down lap. !8 laps at 2.0 miles per lap = 36 miles and used 3.0 gallons, ~ 12 mpg....
From the Supps for the RunOffs:
6.7. Sound Control will be in effect for this event. Sound limits will apply as follows:
* SRF – 90db for all test day and qualifying session s. The race will be...
Pipe is mounted in the same place and I've had no issues with bearings.:thumbsup:
A conversion from 2-Stroke to MC engine is pretty straight forward. The packaging is pretty tight but makes a great race car - and fast too.
I'd ballpark the total cost at ~$17,500 minus ~$2000...
Zak, send me a PM with your phone number and a good time to call. I'll call you and talk about the class, I can talk faster than I can type! Ted
So, will the F500's get their own race now? FE only has 11 entries and they're having their own race.
In my opinion it makes no sense to combine Formula F and F500. Lap times are to close...
Hey Scott,
I have the same car (Novakar) with the same engine (2006 GSXR-600). Send PM if you'd like to talk or email me with any questions you might have. You're going to like the package once...
Response from the original poster:
1. Reading these posts should be enough to give one the flavor of the c__p being posted not sure what additional c__p Jim Murphy could supply via an offline email....
47442
47407
above cartoon is meant to lighten the tone of our discussion.:kiss:
Quote J. Weida from another forum:
Posted: Sun Jul 13, 2014 1:21 pm
The mc cars are faster in a straight line. There problem is they don't handle as well yet. To make things even the restrictor...
47334
As dictated from the SCCA high command without discussion or details of how the need for smaller restrictors was determined. Is the smaller restrictor necessary - maybe? Couldn't prove it by my lap...
Information from the latest (May) issue of SportsCar. "Game Changers - Meet the classes and categories, and some cars, that changed SCCA competition". Game changers have been defined as a "disruptive...
The intended pun in the title is one MC engine (me) amongst ten Rotax/Arctic cat clutched cars.
The spring race at VIR is always a favorite of mine. Traveling from Washington DC to Alton, VA is a...
2014 VIR Majors Race the F500 ran the test day in the first grouping along with all wings and things and formula everything. Really scary closing speeds with the big formula cars but, in my opinion,...
Below are some pictures of my converted F500 Novakar to F600.
1.Before converting picture shows the 2-stroke Rotax engine installed...
I’d like input on shifting from anyone using a motorcycle (MC) engine in any class.
Why do I need to re-engage the clutch on each down shift? With a sequential shift pattern why can’t I just...
I believe my top speed was limited by the lack of carrying enough speed through turn 10. I hit the rev limiter (15,500) a couple times during the race but not on the straight.
The water press...
I arrived at Summit Point Motorsports Park on Friday (test & tune day) for the Labor Day double Regional intending to get some seat time and check out the conversion. Spend all day Friday fixing all...
Where’s the best location to place the oil temp and pressure sensors? I’m currently setup with them in the output line, at the side of the engine, before the oil goes through the cooler.
The F500 and the F600 are essentially the same chassis but with different drive trains and the race at Topeka shows them to be equal in lap times. I’d be interested in your driving impression of...
In the process of converting my Novakar to MC 600 engine. Purchased a used GSXR 600 engine locally and decided to get a oil analysis test done as a baseline. The company, Titan Laboratories in Denver...
Could someone confirm the water flow in a GSXR 600. I believe it to exit the head under the intake, go to thru the cooling system, back through the water pump, and enter the block under the exhaust...
Another contact would be C.J. McAbee at McAbee Motorsports. Don't have his address or phone number but below is his Facebook page. Ted
https://www.facebook.com/McAbeeMotorsports
Do you intend to direct air over or under the nose? Looks like over the nose which is somewhat different from your previous Novakar designs. Ted
Overall Group 1
1. CJ McAbee F5 2:52:769
2. D. Loken FF 2:53:486
3. S. Bamford FF 2:54:16
F500 Class top 3
1. 1. CJ McAbee F5 2:52:769
2. J. Walbran F5 ...
Anyone using the AiM SoLoDL data logger? Couple of questions if anyone has:
1. Can you set a RPM shift light/indicator with it?
2. Can it be mounted on the steering wheel without affecting the...
I'm converting my car to F600 (07 gsxr 600 mc engine) and need to resurrect my lambda sensor in the AiM data logger. Can someone confirm the weld in bung is 18M x 1.5 thread? Also, it used a four (4)...
John,
I live in Silver Spring and would be happy to discussion F500/F600 cars with you. Send a PM and we can exchange phone numbers.
Ted
Be careful what you wish for - what happens if the FV and F5 entry numbers are not sufficient for their own Group? Where will we run? Ted
Call Mike Q 914 469 7067. Very helpful.