Okay - I did not see the answer above so I counted the splines on a TRW box and the number is..........63. (not not 42)
I get the spline diameter as between .642" and .640"
I do not believe...
Type: Posts; User: FVRacer21
Okay - I did not see the answer above so I counted the splines on a TRW box and the number is..........63. (not not 42)
I get the spline diameter as between .642" and .640"
I do not believe...
I found this while researching an old Apex Speed Post.
Seems like you cannot keep a good company down.
https://www.jennerjahn.com/blog/jennerjahns-remarkable-progress/
ChrisZ
It used to be models, slot cars, sports car, autocross, time trial, road racing.
my suggestion today is iRacing, indoor karting, time trial, racing or autocross.
much depends on your area. ...
Updated:
"I did experiment with a setup that mounted the steering box on a bracket forward of the axle beam. That left the steering column as the only thing in the foot box area to inter fear with...
This is probably the hardest thing I have learned, even though it might be the most fun....
Don't think you can out engineer the designer. Instead spend the time adjusting and tuning it properly....
Racing Law #37
If you purchase an enclosed trailer, it will immediately be filled.
Corollary A to Rule # 37
You can never have a big enough trailer.
Corollary B to Rule #37
I started this two hours ago and got distracted. BTW - Happy New Year.
“actually, generally the SLOPPIEST point of the box is in the center.. so it might even be a detriment.”
As Dan...
I had started a "buyers" guide and was working on some of the above info.
One thing to remember is your shoe size.
I can say that a Lynx/Caracal B/C should have the widest footbox, maybe a D13...
Vintage restores are usually a labor of love. Actively raced cars don’t hold their value unless they have been recently refreshed. But you will see prices more than say 5 years ago, as the cost...
Steve,
were these Donn Allen cells? I have one where the outside is good but the foam has turned to powder. He did not leave a port to get to the foam and I understand it is glued in. I...
Before you buy.....
The rules have changed and it may be easier or more difficult depending on the condition of the car.
Even if you had a log book, it may require additions or modifications.
...
I used to use spray gasket remover. Spray it on, let it sit and wipe it off. I don’t know if the current formula is strong enough.
Carburetor cleaner is too “runny” but you soak a rag or...
just curious what other options - how about tapping and a threaded plug? No heat involved. Depends what is on the other side….and how thick the casting is there.
ChrisZ
I found this on a airplane website:
Fuel Bladders
If you have an airplane with rubber type flexible fuel bladders, the standard recommendation is to keep the tanks full in order to minimize...
This is the switch that was used on Citation FV as a master switch and I am using it on my FV as a ignition power switch.
...
Mostly for new FV owners.....
If you have an unknown engine, the best thing would be to degree the cam off the pushrod to check for a worn cam. An engine builder would do this normally during a...
i have a food vacuum bag seeker that you probably could find at a yard sale.
together with above and you should be all set.
chrisz
Rick,
Just fond a 1965 copy of the GCR and no mention of 4"
I have never heard of this before.
I did find this interesting:
Replacement of stock exhaust system with a separate
exhaust...
The drums should be checked every session. I use a “loose” cotter pin and if I see that is binding, I suspect a problem. Make sure you do not use the shim like washer. It will pound out. ...
You want a filter more like this:
https://www.knfilters.com/ra-0510-universal-clamp-on-air-filter
A filter "may" restrict HP, but other things like exhaust and intake manifold might have a...
Bob,
Nothing taken from you, I was referring that Hewland does not think their customers capable of handling this.
I spoke to Bruce MacInnes from SBRS and while they still teach heel and toe...
“Firstly, it is impossible for a driver to co-ordinate the complicated sequence of all five physical movements accurately.”
Gee, I don’t know whether to be corrected or insulted. :)
I...
Interesting topic - for people moving from iRacing to a real car. BTW Crash damage is ALWAYS on. :D
I started in FF but have spent the last many years racing FV. I also race in iRacing, but use...
I was going to add - I had a set that had been sitting for a few years. Took a rubber glove or balloon over one end and filled it up with vinegar for a few days. For straight pipes like collectors,...
I made a ft mount using the lower case bolt. Made it in two parts and then bridged it in the front.
do both chassis have the “ears” on the chassis rails to bolt the mount to?
ChrisZ
Did we forget Duct Tape? :D Edit - I missed the Gorilla tape above - I do use a lot of it… Gene Grimes theory - buy Krylon that matches colored duct tape and paint car…
Brakleen,
a lot...
Mike,
Not a Tesla expert - just an lurker. Since I was into slot cars before IC engines, I alway wondered about electric motors for cars. If I was 30 years younger.....
Looks like they are...
Gary,
You don't mention which car you have. If so we can direct you to someone who has or still makes a mount.
If you have car that did not originally come with a mount, it was probably not...
For those who have not seen some of the exploits of electric car owners, you can check out:
https://youtu.be/OAQWWgI2yvY
https://youtu.be/UBShy2MyHKM
Right now they seem to fit well in...
I just found some pictures of the Crusader Kit and did not see a seat in there, so it might not have been available.
Is Blake Tatum still on Apex Speed? He might know.
Does anyone have the...
What car do you have?
Many Vees come with seats but are taken out for tall drivers.
Depending on the make, someone might have a seat laying around.
Alternative is to make a custom foam seat....
Danny,
If you have a longbox with a 1:26 3rd, that is a good overall box.
Lime Rock - perfect -
Thompson - you will feel pain coming out of the hairpin, but since it is hard to pass going...
I had a problem at New Hampshire and traced it down to a bad fuel pump.
I was only running 2 psi deadheading the pump and less than 2 with a Tee.
Dave Car says anything less than 3 and the pump...
Rich,
Are you running a filter?
Even a small piece if fuel cell foam will find the needle and seat.
I have been running an EMGO cleanable metal filter in the line going to the pump. It...
Thought people would be interested in this. A little dry, but does go over the current status of Avgas:
The Long, Twisted And Slightly Ridiculous Story of Avgas Part 1
The Long, Twisted And...
By the way, when looking through the New Hampshire Supps for this weekend, I found the following:
Fuel available:
Pump (self serve)
Sunoco 93 unleaded,
Sunoco 260 GTX (98 octane unleaded); ...
Nitrogen!
Based on the comments above, for getting out on the track,
80 in front
150 min in rear.
if you don’t have the tools to do this, someone can help you at New Hampshire.
...
Danny,
To break this down:
1. 91 octane will be okay for a Vee
2. Non-Ethanol is good for your fuel cell and system
3. The missing element is lead. *
Dave Carr from Autowerks, says we need...
Danny
Welcome to FV.
If you can check to see if the engine had been to a specific engine builder, that would be helpful.
Each builder has a numbering system. I would not assume "R" =...
For new people getting into FV there are some practical matters.
The nearest airport is 30 miles away or more. So it is 1 hours out and back as well as the street car fuel cost.
The local...
Many years ago, when I was a wee lad racing slot cars, I dreamed of scaling up one of Ron Mura’s motors and putting it in a car.
the only problem was the extension cord kept getting wrapped...
Formula First never took off in the NE. Too long a discussion for now but the short is, with a large established base, it is harder to get the whole group to switch. With a spec tire and disc brakes...
If you are looking for some competition, F5/500/600 seem to hang out at the Majors level.
Not much in the New England area, if you run you will get lumped in with FF, FC and other winged cars. ...
The D13 should have a steering arm extension as shown in this picture:
http://bellaphotographics.com/Formula%20Vee/pages/Caldwell%20D13%20FormulaVee%2074.htm
Next there are some 9" steering...
Greg,
You should be at or close to the 3" ride height with no shocks.
Before you go too far, some questions:
Is this a new spring pack or used spring pack?
If a used spring pack, is is...
Greg,
I don't think we are disagreeing. Once the camber is set, if it changes it has to be a issue with the spring/shock. So you have to check the bellcrank angle first to see if it has changed...
Matt,
Yes, if you are doing a complete alignment. But say the spring sags or the pressure changes and you do a quick change to the camber, you might not remember in the heat of battle. I am not...
I slightly disagree with using the push (or pull rods) to change camber. When you change the length of the “rods” you also change your droop. If you set your car up with a good spring and the...
because there could be some novices checking in.
Just remember there are the private schools (like Skip Barber, Lucas, etc) and at the opposite end of the spectrum are the SCCA schools. The first...
It looks like a Lynx B with a zero roll conversion. Still has the original trailing arms.
I remember this from Jim Schings web site but cannot find a picture in the Internet way back site.
I...